|
3 in Sander sparks |
06/18/2003 09:48 AM |
lkw441 |
I have a 3" x 21" belt sander from ***** (315.117131). When I turn on, sparks are coming out from housing. There seems to be an adjustment knob for the front roller but tightening an loosening does not appear to help. Any ideas. Thanks. Larry |
Member Since
06/18/2003
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
3 in Sander sparks |
06/19/2003 08:26 AM |
plumber Tom |
The brushes are probably worn down around the armature. A good tool repair can replace them. |
Member Since
05/11/2003
Total Contributions
829 Posts
|
| Post Reply | Watch this Topic |
sparks |
08/16/2007 07:24 PM |
stephanie49 |
I just purchased a Craftsman belt sander 4x24, 11 amp, and it sparks too. how can you say that brushes are worn. It has to be something else. |
Member Since
08/16/2007
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
 |
| | |
Moderated by Handyman 
