BobVila.com

Corian

I have worked with a small amount of Corian. It works fine with normal carbide woodworking tooling.

I don't like polished surfaces so I did a matt finish.

Use the ROS up through 400.

Then cut square of white ScotchBrite and used that with the ROS and some paste wax.

http://www.naturalhandyman.com/iip/infcountertop/infsolidsurface.shtm

While DuPont does sell pieces large enough for a counter top to DIY they will allow small pieces to be sold and have a booklet on how to work it.

You can get it here.

http://stonewood.safeshopper.com/13/cat13.htm?500

Cutting Corian