By the sound of it, the ceiling isn't level either, so even if you levelled the cabs you'd still get a void above the crown. If you can level the cabs to the ceiling I'd do that now before the ct's arrive... but then you may have trouble with the marble fitting from the pattern.. so it may be too late for that.
The best solution now, would be to mark the crown to the ceiling, and rip filler to fill those voids.
Keep the crown distance to the top of the cab doors constant.
Use the same material as the crown, if they are paint grade, match that, if mahogany then rip mahogany & stain to match the crown... I believe that would be the most visually acceptable at this point.
http://www.altereagle.com/
http://decks-ca.com
http://kingofcrown.com
Alter Eagle Construction & Design |
Member Since
12/28/2002
Total Contributions
540 Posts
|
Moderated by Mark Hammond 
