WHILE CLEANING OUT THE CARBURATOR, THE SPRING AND WIRE LEVER BECAME DISENGAGED AND I NEED HELP PUTTING THSES BACK WHERE THEY BELONG. IS THERE A SCHEMATIC AVAILABLE?? HELP!!!!!!!!!!!!!!!!THANKS

WILRAM - hi, I'm not familiar with your mower but what I'd suggest is determining the engine model, type, and date code and then checking the engine manufacturer's website. (You may not need anything beyond the engine model number but to be safe, I'd write down all the numbers I could locate on the engine.) The carbuerator hookup will be explained there since it's an engine component. Another method, although not the best, is to locate a local dealer who sells the same brand/model mower and look at one on the display floor. Good luck! Jim D/West Point, VA