FORUM PROJECT TOOL LIST!! - The Rough Cut Show Forum - BBS

View Channels
Featured: Bedrooms

View Showrooms
Featured: ETO Doors - Interior/Exterior Doors

The Rough Cut Show Forum

Not Logged in.

Moderated by TChisel

!! FORUM ALERT !!

Dear Rough Cut Show Forum Member,

Tommy MacDonald's discussion forum, The Rough Cut Show Forum, is moving to a new location. The Rough Cut Show forum, on BobVila.com, will no longer be accepting post as of Tuesday, June 17th 2008 @ 11AM EST. Due to the current privacy policies at BobVila.com we will not automatically transfer your post or user information. If you would like to continue to be a part of a growing woodworking community, please follow this link and sign-up for the new and improved Forum at http://www.TChisel.com/forum/ .

Sincerely,
Staff of BobVila.com

Font Size: View Style:

Flat

Tree

Post Reply | Post New Message

Title/Content		Author

FORUM PROJECT TOOL LIST!!	03/18/2008 04:54 PM	TChisel
POWER TOOLS 1 table saw 2 jointer 3 thickness planer 4 band saw 5 router table w bits 2-1/2"flush cutter and 1/4 cove 6 drill press w 1/2 forsner bit 7 dremmell w router fence 8 mortiser HAND TOOLS 1 pencil paper(Al) 2 square 3 #4 hand plane 4 scraper 5 a good knife 6 marking gauge 7 chisels 1/8 1/4 3/8 1/2 3/4 8 gouges #5 20 #5 16 #5 12 #5 8 9 tramell points 10 hot plate 11 pan 12 sand 13 a leather punch set 1.5mm to 4mm i mat have forgotte something but this is close enough		Member Since 11/08/2007 Total Contributions 388 Posts
Post Reply \| Watch this Topic		Member Since 11/08/2007 Total Contributions 388 Posts
project tool list	03/20/2008 10:18 AM	bwoodhack
Project Tool List	03/20/2008 10:58 AM	NLamens
Dremel Tool	03/20/2008 11:12 AM	CMiddleton
dremel	03/20/2008 11:17 AM	TChisel
Dremel Tool	03/20/2008 01:17 PM	CMiddleton
Dremel Tool	03/22/2008 11:04 AM	CMiddleton
speed	03/22/2008 12:03 PM	TChisel
dremel base question for T	04/12/2008 12:33 PM	paulcomi
forum tool list	03/20/2008 02:45 PM	bwoodhack
Plunge base for Dremel	03/20/2008 04:03 PM	CMiddleton
dremel	03/20/2008 07:07 PM	TChisel
dremel	03/21/2008 09:13 AM	JustinD
where to buy	03/21/2008 09:16 AM	JustinD
dremel	03/21/2008 10:07 AM	TChisel
Veneer package - Berkshire Veneer	03/21/2008 10:55 AM	NLamens
thanks for the cpo dremel link	03/21/2008 12:20 PM	paulcomi
veneers	03/21/2008 04:04 PM	JustinD
Happy Mac Package Order	03/21/2008 05:00 PM	CMiddleton
veneers	03/21/2008 05:05 PM	TChisel


	About \| FAQ \| Contact \| Sitemap \| Privacy Policy \| Terms of Use \| Help © BobVila.com 2008