|
Fasco bath exhaust fan parts |
04/01/2004 12:05 PM |
Nohair |
Is it possible to obtain a new light lens for a Fasco Model 768 bathroom exhaust fan light combination? Seems the plant that made these many years ago in Fayetteville North Carolina is gone. I could not find a website or phone number anywhere. Thanks.
Jack Majewski Dayton Ohio
Jack Majewski |
Member Since
04/01/2004
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
Fasco Bath exhaust and Lighting |
05/03/2004 11:30 PM |
waterfall |
I saw your posting and figured my search was over, but it appears i'm in the same boat as you. I too am looking for a "trim" kit for fasco products. I have a Light/Heat Lamp/Fan (B674W) and an exhaust fan (B664).
The stickers in both of these fixtures indicate Fasco and the model numbers I mentioned above, but I'm beginning to think that FASCO is just the motor manufacturer and that possibly one of the other companies (Broan, Panasonic, NuTone, etc)is the unit mfg.
HELP!!!!!
These units are in a house that my parents recently purchased. Neither unit had the trim, I unfortunately assumed that it would be "no big deal" to find the parts. We of course have already skim coated and painted the entire house, so I would really prefer not to have to completely change both units - because as my luck goes the exiting rough openings/units will be much bigger or smaller in comparison to anything I buy.
If anyone can help me - I would appreciate it.
Thanks |
Member Since
05/03/2004
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
Fasco bathroom fans |
05/04/2005 01:15 PM |
bobnlee |
I had the same problem. I needed a replacement plastic lens for a ceiling light/fan and all I had to go on was FASCO.
Correct, they make the motor. The unit is produced by Marley. When I called Marley at 800-452-4179 I got another number. I guess it was a distributer, but I finally ordered the part. Call 800-654-3545. |
Member Since
05/04/2005
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
Fasco bath exhaust fan parts |
10/26/2005 06:32 PM |
twinsoul |
A big thank you to bobnlee for the Carroll Parts Company phone number (800-654-3545)! I was able to find a replacement control switch for a 31 year old Fasco bath heater and exhaust fan! Wasn't cheap, but at least I don't have to replace the odd sized exhaust fan which would have required a lot of drywall and plaster work on a swirled plaster ceiling. |
Member Since
10/26/2005
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
Fasco Bathroom Fan parts |
12/19/2007 03:13 PM |
DonaldS |
Just want to say Carroll Parts is still stocking parts for these fans. I needed a lens cover for model A667 and they were in stock.
Great job Carroll Parts and BobVila.com |
Member Since
12/19/2007
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
fasco parts |
01/16/2009 03:21 PM |
slither302 |
yes just ordered some today, great customer service! |
Member Since
01/16/2009
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
fan grill |
02/05/2009 01:17 PM |
captain28467 |
I need a fan grill also. Do you have the phone # where you ordered yours? |
Member Since
02/05/2009
Total Contributions
2 Posts
|
| Post Reply | Watch this Topic |
fasco bath fan |
02/06/2009 02:58 PM |
captain28467 |
I need a grill for a fasco ceiling fan. The only number I can find is one on the grill which is 8683-8111.
Where did you order your part from? |
Member Since
02/05/2009
Total Contributions
2 Posts
|
| Post Reply | Watch this Topic |
fasco replacements |
02/11/2009 10:32 AM |
ncampbell713 |
i saw the older postings and called marley because the carol # was not valid...new phone # is 800-452-4179
happy hunting! |
Member Since
02/11/2009
Total Contributions
3 Posts
|
| Post Reply | Watch this Topic |
edit |
02/11/2009 10:43 AM |
ncampbell713 |
sorry that is the marley #, i just called back and another marley cust svcs rep gave me the carroll phone # and it is the same as above 800-654-3545 but when you call it says your call cannot be completed!! ??? i'm doing some more digging, i'll let you know! |
Member Since
02/11/2009
Total Contributions
3 Posts
|
| Post Reply | Watch this Topic |
 |
 |  |  |