** What would cause it to make that grinding noise and at the same time not allow it to drain the water out? **
Something (broken glass, bone, bread bag clip, etc., etc., etc.) in the pump possibly resulting in damage to part(s) of the pump.
** I took the bottom cover off the front to take a look **
The interior of the pump is usually accessed from inside the dishwasher NOT behind the access panel in the motor compartment (although that IS where you'd need to go to totally remove the pump from the dishwasher... if you wanted).
** Update from yesterday. **
If you want to follow-up, please post the additional comments are a *reply* to a previous message rather than starting a new message each time. That way all discussion on the same topic will be kept together in a single message thread so others can follow it from start to finish. TIA
Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Dishwasher
The Appliance Information Site
=D~~~~~~ |
Member Since
11/12/2002
Total Contributions
4617 Posts
|
Moderated by DanO 
