|
Did you ever find your GE stuff? |
12/16/2005 12:25 AM |
TomR |
Let me know. I have the same stuff in my house, and I can point you in the right direction.
Regards - TomR |
Member Since
10/11/1998
Total Contributions
89 Posts
|
| Post Reply | Watch this Topic |
Still looking. |
12/16/2005 11:28 AM |
philip50 |
No. I am still looking for ivory colored GE low voltage switch cover plates, new or used. I could use single switch and double switch plates. Do you have any available or know where to buy them?
Thanks. |
Member Since
07/29/2005
Total Contributions
2 Posts
|
| Post Reply | Watch this Topic |
still looking? GOT 'EM! |
11/20/2006 06:39 PM |
soldoubt |
i have exactly what you're looking for.
anyone needing New old stock GE ivory switch plates email me at s.carlos.kirk@gmail.com.
i have a ton of plates for configurations of 1-, 2-, 3-, and 4 rocker-style switches.
never used. still in original factory packing. |
Member Since
11/20/2006
Total Contributions
2 Posts
|
| Post Reply | Watch this Topic |
GE cover plates |
11/22/2006 09:10 AM |
dynamech |
Soldoubt; I tried to e-mail you but it came back. Is your e-mail correct. I did drop the period after s and then it went thru. hope you got it. |
Member Since
11/22/2006
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
I also need coverplates. |
01/02/2007 09:18 PM |
jthatcher |
Soldoubt: I e-mailed you at the address you provided above about the switch cover plates. Thanks. |
Member Since
01/02/2007
Total Contributions
4 Posts
|
| Post Reply | Watch this Topic |
Still need switch cover plates... |
01/19/2007 03:34 PM |
jthatcher |
I am still trying to locate 1-gang, 2-gang, and 3-gang switch cover plates. Attached is a photo of the one that I replaced. Unfortunately, the store that I bought this one from threw out their entire stock before I could get more. Anyones help would be greatly appreciated.
NOTE: I've tried emailing soldoubt (see above), and so far have not received any responses. If anyone can help me get a hold of him, please let me know. My email is jthatcher962@yahoo.com. Thanks! |
Member Since
01/02/2007
Total Contributions
4 Posts
Report this post's image |
| Post Reply | Watch this Topic |
ge low voltage cover plates |
01/23/2007 10:50 AM |
bcahill |
If you still have some i am desperate for 1,2 and 3 rocker cover plates. I attatched a picture of what I need if it the same thing you have
bob cahill
(607)343-6254
bcahill46@hotmail.com |
Member Since
01/23/2007
Total Contributions
4 Posts
Report this post's image |
| Post Reply | Watch this Topic |
cover plates |
01/24/2007 12:39 AM |
bcahill |
I think I am probably looking for the same cover plates that you are. Did you have any luck? |
Member Since
01/23/2007
Total Contributions
4 Posts
|
| Post Reply | Watch this Topic |
Low voltage switches |
01/26/2007 02:23 PM |
Billhart  |
DID you go through the WHOLE THREAD?
Specially the links to Dale.
He is one source of switch plate covers. These are in SS, but might be available in other material.
http://www.rensup.com/Switchplates/98222.htm
http://www.rensup.com/Switchplates/98223.htm
http://www.rensup.com/Switchplates/98224.htm
But they are for a different style of switch. IIRC it is the style that Dale has, but I need to reboot computers to see their website so I can check on them. |
Member Since
04/26/2005
Total Contributions
3411 Posts
|
| Post Reply | Watch this Topic |
No luck yet... |
01/26/2007 10:09 PM |
jthatcher |
Nope, no luck so far. I've been uable to get a hold of Soldoubt (see above), and he seemed like my best chance. I'll keep looking... |
Member Since
01/02/2007
Total Contributions
4 Posts
|
| Post Reply | Watch this Topic |
 |
| | |
