My daughter is purchasing a house that has low voltage switches, thus my review of this thread.

Has anyone considered using wood switch plates? I lasercut many different size and shape parts and have done regular (110v) switches and outlets. I have never done these, but do not see why they cannot be done.

If anyone is interested you can contact me at summerskye@comcast.com

I'm also looking for several replacement switchplates for the 1961 GE low voltage system. Has anyone found a source? They are ivory colored, and come in 1, 2, and 3 gang styles. I've checked every site out on this thread, and other than the two photos that were posted, nothing matches what we need at our home. The switches and system are fine - the plates are what we must replace.

If we can't find the plates, do we have to rewire each switch or the whole house to replace it? Electricity is not my strongpoint. Thanks.

I Laser Cut 110v switch/outlet plates from wood. There is no reason I cannot do this for low voltage plates except I need a existing switch plate to layout from.
Wood plates can be stained or painted to match your needs.

If you are interested you may contact me at summerskye@comcast.net.

I am looking for 3 Amp 24 V low voltage switches made by 'square D' company in the late 40's and 50's. Their model number was 1091, 1092 and 1093. They work just fine but I need a few replaclements. A Sierra company made similar type switches and I could use these also. Is anyone out there who knows what can be used now to replace these very old items? I will appreciate your help.
you can e-mail me at
Tony
faph2000@yahoo.com

You can get replacement relays (RR9 and RR9-EZ)and switches (RS2-32 switch; RS2-32P switch with pilot light)from GE Supply. A GE Supply store is likely to be found in most major cities. Look them up on the internet at GE Supply.com also. They do not make exact switch replacements for the 1961 systems anymore, but the switches available today will fit pretty well in existing older mountings. For appearance sake you might want to scrounge and group old style working switches together in some locations and then replace all the switches with new ones in a few other locations. Plates and switches are available in ivory, and there are stainless steel plates as well for up to four devices. One or two switches - one gang; three or four switches - two gang). There is also an 8-switch controller available. It needs a 2-gang box. The stuff will probably be special order at the counter in the store, but prices are reasonable and quality is good. These devices are still used in office buildings. You can also replace the switches with 120-volt momentary contact switches to work the 24-volt relay circuit. (The handle stays center and can be pushed up or down; it returns to center be spring action). You can only fit one per gang, but you can use any kind of plate you want. Not bad for one or two-switch locations. The theory is not difficult but if you don't understand electrical circuits, get help from a friend who does.

Thank you , Sir - I appreciate your help and will try that.
Antonis

Thank you very much! I really appreciate the help. Jasper5

you can find most of the low voltage switch plate covers and parts at
www.touchplate.com , they are very expensive, but it's the only place I can find that has what I need to replace my worn out switch plates in my 1958 or 1960 house. My house takes the 4000 series. They have many different styles and other low voltage products also.

I installed that system in my house also. It is a super system. Parts and switches are still available and in use. Contace GE Lighting, or you search on Google for GE Low Voltage and find info.

It is a rather expensive type system usually used in commercial buildings, schools, etc.

davehale, thank you for the information. I will try GE next time I need a switch cover.