Foundation coating
What is the best product to coat poured concrete foundation for dampproofing? Where to get it? Thanks
What is the best product to coat poured concrete foundation for dampproofing? Where to get it? Thanks
20
answersI need a manual and replacement parts
49
answersPlease help me find an owners manual for this thing. My family would really appreciate it. Thanks a bunch Dan
340
answersI am wondering if anyone has any opinions about these doors that come with mini blinds in between the glass? What is the possibility of them breaking or getting d...
26
answersThe most durable and easiest to clean of all paint sheens, high-gloss paint is hard, ultra-shiny, and light-reflecting. Think appliance-paint tough.
0
answersMy GE Model # GSD650X just stopped working. No start at all. I checked the circuit breaker and it's fine. I did unclog the soap dispenser (jammed)before trying to...
4
answersHi, I expected to install Tile on my bathroom floor so I installed Cement-fiber board. I have since decided to install vinyl sheet flooring. Here is my conc...
5
answersThey have been streaked since installed. Pella did try to clean them but they are still streaked and very very hard to access (the inside panels of glass). I hate...
0
answersMy 1983 Maytag washer with removable lint filter in the agitator has recently needed such expensive repairs that I replaced it with a new high end washer. I was s...
36
answersI have an in ground pool that will cost too much to repair and open. It would also be too expensive to fill in. Do you have any other viable suggestions or soluti...
1
answersOven not working on a GE JGSP30GEP Gas Range. There are scattered posts about this problem with this model range, but no clear answers to the problem. Here'...
7
answersI'm considering using a permanent wood foundation for a new house. Anybody have any first hand knowledge about these. How the stand the test of time? Water-pro...
16
answersHi, I was given several pieces of marble countertop for free. THey are ofcourse the wrong size, so I was wondering if someone could tell me what type of saw/blad...
6
answersI recently bought a thiry year old house. I would like to fix the wall between the garage and the house. This wall is made of a half inch drywall product, but t...
25
answersCan I set cedar fence posts (4x4) in concrete? I have heard that concrete is corrosive to cedar. If so, what are my options.
6
answersI have a 12' x 12' poured concrete slab patio, and I'd like to put composite decking over it. The clearance below the back door is only about 6", so the deck boa...
4
answersI need a washer that is cut in a certain manner to keep my tub drain up. It's the kind you pull up and twist to drain or stop. Please see the image, been looking ...
0
answersI believe this flooring was discontinued about a year ago. I need 650 sq ft so 38 boxes. Anyone?
118
answersHi, I have a kenmore (sears) range top stove (I think that's what it is), it has four burners and the temperature knobs on the right side. We are having a pretty ...
14
answerskenmore 90 series model.# 82992800 agitator still operates while on spin cycle
1
answers