I can't say as how I've ever heard of what you're suggesting being done. But it does seem to me that you can't open up the space between the two trailers by just opening it up like a can opener. The problem would be supporting the roof when you don't have the walls, which normally do the job.
You might be able to proceed the same way you'd proceed in making a large hole in a load-bearing wall - put some kind of beam to hold up the roof, with occasional posts to hold the beam up. However, that would be a lot of work, and a lot of money. Not to mention the resulting overall structure would not be very strong without a lot of building up, and it would be difficult to seal up from the weather outside.
I think you'd be better off just making do with a limited number of doorways between them. At least it would be a lot less to seal. And the preceding comment may have been rude, but he's right about the expanding foam and paneling/molding. |
Member Since
06/21/2005
Total Contributions
54 Posts
|
Moderated by MiniFoxx 
