Tommy & Eli,
The procedures for the Federal Table are somewhat unclear….the instructions for the layout of the apron mortises seems be intertwined with the lower divider mortises. What are the lengths for the upper and lower haunches for the aprons? How long is each of the tenons for the double tenons and how thick are the tenons of the aprons. Are the aprons and legs flush to each other, or is there a revel? If there is a revel, how much is the revel?
Does the lower divider have a shoulder all the way around or only on the top and bottom? What size is each of the mortises?
Not quite sure what your talking about on the upper divider with just lower the dado set and nick the bottom face of the dovetailed (top) divider. Will there be a shoulder on the below the dovetail?
Also here is component illustration for the different parts...some asked what a doubler and a kicker was
Chuck |
Member Since
02/15/2008
Total Contributions
106 Posts
Report this post's image |
Moderated by TChisel 
