I am trying to install a new kenmore dishwasher. I have two problems. First I don't know what the thread size of 90 deg. fitting that screwes into the unit is. Sesond I need a longer drain hose run than what is supplied with the unit. I have bought a 7/8 inside dia. hose that will plug into a garbage disposal. But I can't find any 7/8 inch fittings to hook it up to the dishwasher. Thanks.

Hi,

**First I don't know what the thread size of 90 deg. fitting that screwes into the unit is**

For the fill valve? If yes, it is a 3/8" pipe thread by 3/8" compression 90º fitting.

http://www.repairclinic.com/referral.asp?R=153&N=745427

**Sesond I need a longer drain hose run than what is supplied with the unit.**

Often 5/8" heater hose works well for us.

I use plastic connectors from local hardware store.

**new kenmore dishwasher**

What is the model#?

http://www.applianceaid.com/model.html

Some model# helps.

jeff.

Appliance Repair Aid
http://www.applianceaid.com/

The fitting is exactly what I need. Thanks I was confussed with 3/8 pipe vs 3/8 compression. As far as the model #

White Kenmore 24 in. Built-In UltraWash™ Dishwasher w/SmartWash™ Technology

***** item #02217022000 Mfr. model #17022

Thanks
Cory

Hi,

I checked to see if they offered an extention kit for the d/w's....doesn't appear so....take in your drain hose to local hardware store and ask for a coupler/connector to fit from the hose that came with the d/w to the one you bought....and a couple of screw clamps.

jeff.

Appliance Repair Aid
http://www.applianceaid.com/