I am trying to remove the bottom kick plate from the front of the dryer to clean out excess lint. I cannot find anything on this particular model number listed in your forums

** Kenmore dryer model 110.68974892. I am trying to remove the bottom kick plate **

On that model the lower access panel looks to pull away from the cabinet toward the top. It should be able to be removed by pulling the top away from the cabinet and lifting it off the two lower support spring clips. Optionally, sometimes a putty knife can be inserted between the side of the cabinet and the edge of the panel and twisted to work the panel free at top.

** to clean out excess lint. **

If you find you have a lot of lint build up in there, someone should probably look into the dryer's venting (see the following link) and the drum sealing system.

- How long can my dryer vent be?
LINK > www.appliance411.com/links/jump.cgi?ID=778

JMO

Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Dryer
The Appliance Information Site
=D~~~~~~