|
Maytag Neptune Dryer |
11/06/2006 08:53 PM |
p12345 |
One of the baffles inside my dryer came loose. I need to remove one of the sides so I can get access to the outside of the drum to re-tighten the baffle. What sequence do I follow to remove one or more of the side panels to repair my dryer.
Thanks,
|
Member Since
11/06/2006
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
Model number? |
11/06/2006 10:01 PM |
DanO  |
Side panels do not usually come off dryers but if you post the machine's full model number, we can check for yours.
You can find tips for locating the model and serial number tag on your appliances in the 'Repair Parts' section of my web site linked below.
Dan O.
www.Appliance411.com/parts/?ref411=Maytag+Dryer
The Appliance Information Site
=D~~~~~~ |
Member Since
11/12/2002
Total Contributions
3785 Posts
|
| Post Reply | Watch this Topic |
dryer baffle is lose |
02/12/2008 09:51 PM |
harolddemott |
model MDE7657AYW |
Member Since
02/12/2008
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
Same question? |
02/12/2008 10:02 PM |
DanO |
.
You don't appear to be the original poster but assume you would like to know how to access the drum on that model as well? The following link should pertain to that dryer design.
- Maytag 'Sloped Front' Dryer Disassembly
LINK > http://tinyurl.com/3bzcsw
BTW. You can see exploded parts views of that exact model at this link:
- Maytag MDE7657AYW Exploded Parts Views
LINK > www.appliance411.com/data.php?apm=MDE7657AYW
JFYI
Dan O.
www.Appliance411.com/parts/?ref411=Maytag+Dryer
The Appliance Information Site
=D~~~~~~ |
Member Since
11/12/2002
Total Contributions
3785 Posts
|
| Post Reply | Watch this Topic |
 |
| | |
