|
Need Help On OnDura Roofing Over A Doublre Shingle Roof! |
11/21/2004 10:14 PM |
agmines |
OnDura at:
http://www.ondura.com/home.htm
Ondura re-roofs over practically anything.
Ondura can be applied directly over even surfaces like asphalt shingles. Or over uneven surfaces by first installing nailing strips. In a re-roof application, that saves you the bother and expense of having to tear off an old roof. And that makes re-roofing easier, faster, and cheaper.
Sheets
Size: 48" x 79" each
Weight: 18 lbs.
Sheets per covered square: 4.5
What if I have a Double Shingle Roof already of 35 Square Feet on an Old House built with a Cable Roof in 1950's in Pittsburgh????
Is OnDura too heavy and what about snow making it heavy and what about electrical heat gutters hurting it???
I am being told by contractors that Three Layers is too heavy for a roof, and is Ondura too heavy as the Third Layer???
Please Respond ASAP!
agmines@yahoo.com |
Member Since
11/21/2004
Total Contributions
2 Posts
|
| Post Reply | Watch this Topic |
ondura |
12/05/2004 07:24 PM |
Piffin |
Ondura is undoubtedly the poorest excuse for a rof material that I have ever seen or had the displeasure to repair.
Three layers of roofing is getting to be too much
Excellence is its own reward!
|
Member Since
11/07/2002
Total Contributions
1285 Posts
|
| Post Reply | Watch this Topic |
ondura roofing |
08/03/2006 11:08 AM |
wandaejg |
I used it on my horse barn and found it easy to install, but we would not use it on a house. There are nicer looking panels or tiles out there. This is a less expensive roof than metal. But, if a tree branch fell on it ... So you get what you pay for. We like it for the use we put it to.
WandaEJ-G |
Member Since
08/03/2006
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
Too heavy? Ha! Many contractor's want to upsell. |
07/18/2007 10:36 PM |
ourownhouse |
If your roof rafters are equal to today's 2x6's (which are actually an inch and a half by five and a half) -incidentally a 1950's Pittsburgh home almost undoubtedly has such, it is unimaginable that Ondura over two layers would be any strain whatsoever with two shingle layers. Unless your rafters are badly rotted or termited to the hilt, you will will find they are far harder than today's lumber. Your rafters are probably made of poplar which is yet evn stronger. But even if they are pine, (like today's rafters), if they are of the size as I stated, I would not trust another word of those contractors. My house too is 1940's with 2700 sq ft of roof with 2x6 rafters and 30" overhangs. The roof doesn't even know it's up there. |
Member Since
07/18/2007
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
 |
 |  |  |