Home > Ask a Question > BBS > Appliances > No element_S_

Appliances

Not Logged in.
Moderator Moderated by DanO Login | Register
RSS
Font Size:
   View Style:  Flat   Tree
Post Reply | Post New Message
Title/Content Author

Maytag Performa Dryer

 11/02/2009 04:50 PM DavidnChris03
Indent

Model number?

11/02/2009 05:41 PM DanO Moderator
Indent

model number

11/03/2009 11:46 AM DavidnChris03
Indent

What is and isn't working

11/03/2009 11:49 AM DavidnChris03
Indent

No element_S_

11/03/2009 01:21 PM DanO Moderator

** The heating elements heat, or should I say one of them is still working **

There is only a single heater element in most dryers... including yours. It consists of a single coiled wire, frame, insulators and wiring connections. Power goes in one of its wire connections and out the other. If only part of it is heating and/or heating when OFF, the element is likely shorted to ground if not physically broken causing the short. The element likely needs a proper inspection and possible replacement.

- Maytag PYET444AYW Heater Element
LINK > www.appliance411.com/data.php?rc=2798


* Disconnect power from the dryer until it can be serviced. It is a major fire hazard if any of the element coil is getting warm or hot while not in operation! *


** the motor is not working. **

The element staying on even when the dryer is off may have blown the dryer's thermal fuse (see the following link) preventing further operation.

- Maytag PYET444AYW Thermal Fuse
LINK > www.appliance411.com/data.php?rc=3344

JMO

Dan O.
www.Appliance411.com/parts/?ref411=Maytag+Dryer
The Appliance Information Site
=D~~~~~~

Member Since
11/12/2002

Total Contributions
4618 Posts

Post Reply | Watch this Topic




About  | Press Room  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2009 BobVila.com