Hi,
**On the clock digital read out I get a F2 and a beeping sound until I push any of the set pads - model number listed on the stove is 911.4674591**
911.######### is a Roper built Kenmore. I found these for Roper....
F2 - Oven temperature sensor shorted - Replace oven temperature sensor
F2 - Bake/Clean temperature runaway alarm
1. Allow unit to sit for one hour to cool down
2. Place oven temperature sensor in a glass of ice water
3. Measure oven temperature sensor resistance. The oven temperature sensor should measure about 1000 ohms while in the ice water
· If the oven temperature sensor is good but the problem remains replace the electronic range control (ERC)
· If the oven temperature sensor is bad, replace it
http://www.repairclinic.com/referral.asp?R=153&N=252618
Oven sensor assembly - 911.4674591 - if needed.
jeff.
Appliance Repair Aid
http://www.applianceaid.com/
JRAppliance
http://www.jrappliance.ca |
Member Since
07/24/2004
Total Contributions
490 Posts
|
Moderated by DanO 
