|
Recessed Lighting |
11/02/2007 08:36 PM |
bjmunroe |
Hi
My wife wants me to replace 2 recessed lights with 2 pendant lights,,ok so how hard is this going to be ????
Barry |
Member Since
11/02/2007
Total Contributions
7 Posts
|
| Post Reply | Watch this Topic |
Can to Pendant |
11/03/2007 08:55 AM |
Billhart  |
I am assuming that you don't acess to the can.
You should be able to remove the box through the hole. But it won't be an easy task. Then install a ceiling fan box that installs from the room. It uses an expanding bar to thold the box.
However the hole will probably be bigger than the box and either ceiling patching are a large medalion. But some lights might have large enough trimplates.
But there are a number of conversion kits. Google found these.
http://storesense.megawebservers.com/HS1749/Search.bok?category=lights
http://instant-pendant.com/index.asp?page=light
http://www.thecanconverter.com/ |
Member Since
04/26/2005
Total Contributions
3411 Posts
|
| Post Reply | Watch this Topic |
Thank you !!! |
11/03/2007 04:13 PM |
bjmunroe |
Thank you Bill |
Member Since
11/02/2007
Total Contributions
7 Posts
|
| Post Reply | Watch this Topic |
Can light to pendant |
02/15/2008 02:57 PM |
tccman |
This is possible to do. There is a kit called "The Can Converter" which will allow you to convert a recessed light either into a pendant. Everything is included in the kit, including a cover plate.
Their website is, www.thecanconverter.com. Where you can order directly from them.
Hope this helps! |
Member Since
02/15/2008
Total Contributions
1 Posts
|
| Post Reply | Watch this Topic |
 |
 |  |  |