|
Sears Craftsman Garage Door Opener Problems |
02/09/2008 12:17 PM |
RedSnapper |
I have a double car garage but one of the garage doors won't work with the remote, on top of that the outside keypad won't work for that door either (it works for the other one fine, and did work previously, but now doesn't recognize the password). So two problems, i need to get the password working so i can manually enter on the outside keypad to open the door, and secondly i need to get my remote working for that door. The other door and remote work fine, i have changed the baterry on the outside keypad also, and it lights up. i also changed the battery on the remote. The previous owners said they never used them, it's a 2001 home. |
Member Since
02/09/2008
Total Contributions
2 Posts
|
| Post Reply | Watch this Topic |
Garage Door Opener |
02/09/2008 01:36 PM |
Billhart  |
You did not indicate th model number for specific information.
But here are generic infomration for remotes and keyless remotes.
http://www.chamberlain-diy.com/diy04/faq/0,1341,uid-fGNmbmFgZ2ZnaA==_610,00.html |
Member Since
04/26/2005
Total Contributions
3411 Posts
|
| Post Reply | Watch this Topic |
GDO |
02/10/2008 01:14 PM |
RedSnapper |
Thanks, but the link is dead, it's a Craftsman 1/2 HP |
Member Since
02/09/2008
Total Contributions
2 Posts
|
| Post Reply | Watch this Topic |
GDO |
02/10/2008 06:55 PM |
Billhart  |
That link is good, but there is something flaky about the site, Often you need to try it several times.
But here is a another link.
http://www.liftmaster.com/consumerweb/service/faq/faqlanding.htm
Chamberlain make the Sears, Chamberlain, Liftmaster units and they all work the same.
"it's a Craftsman 1/2 HP"
That is not a model number.
The model number will be in the form of 139.5xxxx |
Member Since
04/26/2005
Total Contributions
3411 Posts
|
| Post Reply | Watch this Topic |
 |
 |  |  |