Is anyone out there still having problems with Trex - not only the product but the company?
We started the complaint process in June 2007 and finally heard from the company last week that they do not believe the deck is defective. We sent photos of mold, warping, uneven color and splitting.
They sent a representative last month(March 2008)but in their letter of denial they only refer to the photos we sent last year, from which they have been able to determine that the screws were not placed far enough from the ends of the boards (closer than 1 inch, which is not true). Why this should cause mold, warping and uneven color, I don't know. In some places, the fascia boards warped to such an extent that the screws sheared off, leaving a gap of over an inch. Elsewhere, the boards warped enough to dislodge an adjacent downpipe.
The deck also gets so hot in summer you cannot walk on it barefoot.
I know there was a lawsuit in 2004, but it does not seem to have solved the problems. We spent over $9000 on materials and are now regretting our choice. The deck was only built in 2006. I was looking forward to years of enjoyment, but now we are looking at a big problem. |
Member Since
04/27/2008
Total Contributions
2 Posts
|
Moderated by Altereagle 
