You were right. Here is what I did. - Appliances - BBS

View Channels
Featured: Bedrooms

View Showrooms
Featured: Chadsworth's - 1.800.COLUMNS

Appliances

Not Logged in.

Moderated by DanO

Font Size: View Style:

Flat

Tree

Post Reply | Post New Message

Title/Content		Author

Kenmore Washer 70 Series Won't Drain	03/11/2005 11:48 AM	peteypete
More information...	03/11/2005 01:52 PM	DanO
RE: Kenmore Washer	03/12/2005 06:09 PM	peteypete
Model & Serial Nbr for Kenmore 70 Series Washer	12/16/2006 04:29 PM	dcmngs44
Model number tag	12/17/2006 03:11 PM	DanO
Kenmore washer won't drain	08/21/2008 01:43 PM	sheriberry4
Lid switch?	03/12/2005 08:21 PM	DanO
Kenmore Washer	03/17/2005 03:19 PM	peteypete
Repair?	03/17/2005 03:52 PM	DanO
Kenmore Washer	03/17/2005 07:28 PM	peteypete
Repair	03/28/2005 01:36 PM	DanO
Question	07/16/2006 10:44 AM	555555
Accessing lid switch	07/16/2006 12:50 PM	DanO
Thanks...got another question	07/16/2006 01:44 PM	555555
One thing I should tell you...	07/16/2006 01:50 PM	555555
Installation	07/16/2006 05:50 PM	DanO
Kenmore won't drain	01/13/2008 08:48 PM	sleepypants1
Model number incomplete	01/13/2008 11:12 PM	DanO
70 Series Model 110.22712100	01/24/2008 09:08 AM	pyrael
Lid switch mounting broken	01/24/2008 01:18 PM	DanO
full model numbers	02/04/2008 03:30 AM	sleepypants1
Replace lid switch	02/04/2008 12:59 PM	DanO
part	02/04/2008 01:43 PM	sleepypants1
Kenmore 110.22722100 Lid Switch	02/04/2008 05:17 PM	DanO
THANK YOU!	07/24/2008 05:13 PM	KTsmom
70 series wont drain	09/22/2006 06:23 PM	bearscout7
kenmore washer mod #110 20702990	12/08/2006 03:51 PM	daams123
70s series also will not drain	04/29/2007 11:59 PM	stopletz
Model Number??	04/30/2007 02:23 AM	DanO
Here is the info	04/30/2007 05:22 PM	stopletz
Lid switch?	04/30/2007 10:57 PM	DanO
Well...	05/01/2007 11:15 AM	stopletz
Lis switch contacts MUST close	05/01/2007 02:25 PM	DanO
You were right. Here is what I did.	05/08/2007 02:19 AM	stopletz
I removed the switch, cut the cable and connected the two cables together and plugged it back in. The washer worked again, and in the mean time I ordered a new lid switch which arrived today. Thanks so much		Member Since 04/29/2007 Total Contributions 4 Posts
Post Reply \| Watch this Topic		Member Since 04/29/2007 Total Contributions 4 Posts
Lid switch	05/08/2007 02:53 AM	DanO
What two cables to cut and connect for temp solution?	04/28/2008 01:00 PM	Patrick08
Caution!	04/29/2008 10:42 PM	DanO
Kenmore Model 110.20422991	07/23/2008 08:29 AM	bbuzz00
Test it?	07/23/2008 01:52 PM	DanO


	About \| FAQ \| Contact \| Sitemap \| Privacy Policy \| Terms of Use \| Help © BobVila.com 2008