It is latex over oil based FINISH paint that will give you adhesion problems and on the interior you can apply oil based paint over latex with no problems. I am not sure why you are using Kilz at all unless you have some type of stain to hold back such as a water stain and the latex will not do this anyway. You can use a primer made by the company that made your finish paint and save some money and get a good job to boot if all you need to do is seal up the wall before you apply a coat of say eggshell/satin over a flat paint that is already on the wall. |
Member Since
07/29/2002
Total Contributions
1335 Posts
|
Moderated by Handyman 
