also,If you have a long distance from the grill to the ductwork you migh have to conect the two,at most HVAC supply houses you can buy round stick on collars in different sizes, afix it to the duct work and the run the pipe,I would recomend getting at least a couple screws in the collar, or tape it with a silver insulators tape(regular duct tape loses it's stick after a while)The job is not very difficult however if you don't have much experiance,Look in the phone book and call a few sheet metal contractors....
Good luck!
|
Member Since
02/09/2002
Total Contributions
2 Posts
|
Moderated by cellarwater 
