hi,

Recently i was in the middle of a wash on heavy cycle and after the washer had put water into the mach and rinsed it out it then put more water into it and was ready to rinse a second time but then it stopped what it was doing and started to buzz like a loud timer. At first i thought i had put too many clothes in it so i took some out until basically no clothes were in there. Still no luck in getting it to spin, rinse or anything else.. the model number to this is 11020712990 series ch1594215 type 111 any help you could give me would be greatly appreciated! thank you so much

** Still no luck in getting it to spin, rinse or anything else. **

It won't even agitate now?

If not, does it make any sounds when it should be agitating?

Does the timer advance all the way through the cycles on its own?

Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~

haha unfortunately it wont do anything all, it does make a noise when i move the dial to "spin" or "wash". Any option i choose it makes the buzzing sound.

** it wont do anything all **

It doesn't even fill??

** it makes the buzzing sound. **

From which component on the machine exactly??

Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~

correction, i checked it again today and it will fill and rinse, but now it wont spin or drain. it sounds like it is trying to spin, like the motor is running but it doesnt sound like a healthy motor sounds like something may be loose

** it will fill and rinse, but now it wont spin or drain. **

Will it agitate?

Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~

I tried it out it seems that it wont agitate either.. any ideas?

Agitation, spin and drain are all driven by the same motor. If none of them are operating maybe there is a problem in that motor, maybe a problem in the timer or the wiring between them.

Does the washer make any sounds when these missing functions should be occurring??

You washer model was made for Sears by Whirlpool and is their 'direct drive' design. If you want to delve into it more deeply yourself, Whirlpool has a good repair manual available for that design of washer (see the following link) which might be helpful to you in tracking down the problem?

- Whirlpool/Kenmore 'Direct Drive' Washer Repair Manual
LINK > www.appliance411.com/data.php?rc=1170635

JFYI

Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~

thanks a bunch i will check the guide out and see if i can see what the problem may be thanks again