Thanks for the info guys. I try to keep as few holes as possible but i found if i drill a 1 inch hole i can run 2 or 3 cables versus 2 or 3 small cables. These are old 2x8 beams, im not to worried about them loosing support. The only one i had to place the whole lower than center was on a 4x8 beam as the other side is concret. But I reinforced the area with some wood to compensate it.
Thanks for the help guys! |
Member Since
03/02/2004
Total Contributions
10 Posts
|
Moderated by Handyman 
