Home > Bob on TV > Bob Vila > Storm-Ready Design > Impact-Resistant Windows for a Storm-Ready Home > Installing Impact-Resistant Sliding Glass Doors Video



Storm-Ready Design Project


Installing Impact-Resistant Sliding Glass Doors Video

Bob joins Scott Renfroe from Great Southern Windows for the installation of nine foot by eight foot sliding patio doors. Like the windows throughout the house, these are WinGuard impact-resistant glass doors from PGT Industries. The door opening, like the window bucks, has a pre-cast concrete lip that will prevent the door from blowing in and give it a firm seat for installation. An installer is laying a bed of mud or concrete mortar on the door sill to make a bed for the door frame. Renfroe explains that this helps set the door and also gives a soft bed to help level it. Once the frame has been set in the wet mortar and adjusted for level, temporary screws are installed in the frame so that Renfroe can check for plumb and begin to shim the gaps. He installs set screws, places the shims, drills through them, checks for plumb, then pre-drills and drives the permanent screws into the concrete walls. The frame will sit for at least a day while the mortar sets up because installing the heavy glass panels would compact the mud and disturb the level.



Additional Bob Vila Showrooms
Sears - Custom-Fit Replacement Windows and Entry Doors
ETO Doors - Shop for Interior & Exterior Doors - Lowest Price Guaranteed
Radiantec - Radiantec Solar heating systems for home heat
Sears - Vinyl Siding, Eaves and Overhangs
Rinnai - Endless hot water for your home or business by America's leading tankless water heating company
Western Red Cedar Lumber Association - Real Cedar for Siding, Decking and Outdoor Projects

Real Estate
FLASH (Federal Alliance for Safe Homes) - non-profit, organization dedicated to promoting disaster safety and property loss mitigation
• Mercedes Homes - Developer - homes designed and built for comfort, elegance, efficiency, and safety in Florida, Texas, and the Carolinas.
> View All Product Resources

Other Video Clips from this Episode


Impact-Resistant Windows and PGT Factory Tour

Bob is at PGT Industries in Venice, Florida, for a visit with Dave Olmstead, the code compliance officer for PGT Industries, makers of impact resistant windows. Olmstead explains how windows ...
Watch video and view full description



Manufacturing Impact-Resistant Windows

Bob continues his tour of the PGT window factory in Venice, Florida. Dave Olmstead shows Bob a standard aluminum window with a thin, non-structural bead on the edge. He compares ...
Watch video and view full description



Installing Impact-Resistant Windows

Aaron Renfroe from Great Southern Windows installs the PGT WinGuard windows as Bob looks on. He first applies a thick bead of polyurethane caulk to the flange on the window ...
Watch video and view full description



NOW PLAYING

Installing Impact-Resistant Sliding Glass Doors

Bob joins Scott Renfroe from Great Southern Windows for the installation of nine foot by eight foot sliding patio doors. Like the windows throughout the house, these are WinGuard impact-resistant ...









 

About | FAQ | Contact | Sitemap | Privacy Policy | Terms of Use | Help
© BobVila.com 2008