1311 - Interior Door Installation and Plan Modifications
November 11-17, 2002 | May 12-18, 2003
HI. I'M BOB VILA.
WELCOME HOME AGAIN
TO OUR CENTER ENTRY
COLONIAL PROJECT.
TODAY WE'RE GONNA SHOW YOU
HOW DRUMMOND DESIGN
AND THE COMPUTER
CAN ASSIST IN RECONFIGURING
A HOUSE INTERIOR.
ALSO, WE'RE SPENDING
A LOT OF TIME
DOING SOME
OF THE TRIM WORK.
INSIDE THE HOUSE,
WE HAVE TO PUT IN BASEBOARDS,
WE HAVE TO TRIM OUT
A WINDOW,
AND WE'RE PUTTING IN
A 6-PANEL DOOR.
STICK AROUND. IT'S GOOD
TO HAVE YOU
HOME AGAIN.
CAPTIONING MADE POSSIBLE BY
WE'RE GONNA GET STARTED
TODAY TALKING ABOUT
HOW COMPUTERS PLAY A ROLE
IN DESIGNING A HOUSE,
EVEN IF IT'S SOMETHING
LIKE A CENTER-ENTRY COLONIAL.
THIS COLONIAL STYLE
WHICH WE'RE LOOKING AT HERE
IS SOMETHING
THAT GOES BACK
MORE THAN 2 CENTURIES.
THE CENTER ENTRY,
THE CLASSIC PROPORTION
OF THE HOUSE,
THE FENESTRATION--
THE PLACEMENT OF THE WINDOWS--
WHICH IS VERY SYMMETRICAL
AND REGULAR.
AND HERE,
EVEN THE COLOR HELPS
TO POINT OUT
TO ALL THESE FEATURES
BECAUSE WE'VE CHOSEN
SOME OF MY BOB VILA
S I G N A T U R E L I N E « C O L O R S
LIKE THE WARM STONE
FOR THE FIELD
AND THE CHARLES GREEN
FOR THE SHUTTERS,
WHICH IS ALMOST A BLACK,
AND THAT DESCENT BLUE
TO MAKE THE DOOR
REALLY STAND OUT.
AND, OF COURSE, WE'VE
GIVEN CUSTOM TRIM ITEMS
TO LIKE THE ENTRY, ALSO,
THAT REALLY MAKES IT
VERY, VERY STRONG.
NOW, INSIDE,
THE HOUSE REALLY PRESENTS
A 21st CENTURY PLAN,
AND TO FIGURE OUT
HOW THE COMPUTER
CAN HELP US DO THAT,
LET'S GET TOGETHER
WITH BEN LaROCHELLE
FROM DRUMMOND.
HI, BEN,
HOW ARE YOU?
HI, BOB.
NICE TO MEET YOU.
THANK YOU.
NOW, RYLEY AND I
HAD A LOT OF FUN
BUILDING THIS
PANELED WALL LAST WEEK,
WHICH IS INSPIRED
BY COLONIAL PANELING
THAT WE FOUND AT
THE WINSLOW-CROCKER HOUSE
IN YARMOUTHPORT,
MASSACHUSETTS.
EXACTLY.
AND WHAT WE DID, BASICALLY,
WAS SENT SOME SKETCHES
AND SOME SNAPSHOTS
TO YOUR GUYS,
AND YOU DID THE REST,
RIGHT?
EXACTLY.
WORKING FROM SKETCHES
AND ACTUAL MEASUREMENTS
OF THIS WALL,
THIS IS WHAT
WE CAME UP WITH.
AND IT MAKES IT
VERY EASY FOR A BUILDER
OR EVEN
AN AMATEUR CARPENTER
TO PUT TOGETHER
AN AUTHENTIC-LOOKING
PANELED WALL.
EXACTLY. VERY EASY.
BUT DRUMMOND
GOES MUCH BEYOND THAT
IN TERMS OF OFFERING
ALL SORTS OF ALTERNATIVES.
I MEAN, DRUMMOND
OFFERS THE TYPE OF
HOUSE-PLAN MAGAZINES
THAT MAKE IT EASIER
FOR A LOT OF PEOPLE
TO BUILD A HOUSE
WITHOUT HAVING TO
HIRE AN ARCHITECT.
YES, SIR, WE DO.
AND IN OUR CASE HERE,
WE ENLISTED YOUR HELP
IN HELPING US
KIND OF CUSTOMIZE
THE INTERIOR LAYOUT
OF THIS HOUSE.
YUP. AND...
INTERIOR LAYOUT,
THE DINING ROOM,
UPSTAIRS BATHROOM.
WE ACTUALLY
HAD TO FLIP THE HOUSE
FOR THIS SETUP.
YEAH, I WAS GONNA SAY,
THE BUILDER HERE
HAS BUILT
NUMEROUS HOUSES
THAT ARE KIND OF
THE IDENTICAL FLOOR PLAN,
'CAUSE THIS IS KIND OF
A DEVELOPER'S HOUSE.
AND IN THIS CASE,
BECAUSE OF
THE CONFIGURATION
OF THE LOT
AND HOW IT
SLOPES BACK...
EXACTLY.
YOU NEEDED
TO FLIP THE HOUSE.
WE HAD TO FLIP
THE HOUSE BECAUSE OF
THE LOT CONFIGURATIO«N.
AND SO WE'VE GOT
THE GARAGE WHERE,
IN OTHER HOUSES,
HE WOULD HAVE PUT
THE LIVING ROOM.
CAN WE SEE
HOW THAT WORKS
ON THE COMPUTER?
YES, SIR. EXACTLY.
AS YOU CAN SEE
RIGHT NOW,
THIS IS WHAT
WE CAME UP WITH.
THE ORIGINAL PLAN
WAS FLIPPED AROUND.
WE HAD TO FLIP IT
THIS WAY
TO MAKE IT SUITABLE
FOR THIS LOT.
AND WE CAN ALSO CUSTOMIZE
ANY ROOM IN THE HOUSE.
IF WE WANTED TO CHANGE
THE CONFIGURATION,
THE LAYOUT OF A KITCHEN,
FOR EXAMPLE,
FROM WHAT CAME
IN A MAGAZINE PLAN
THAT YOU BOUGHT
AT A SUPERMARKET,
IF YOU WANT TO CUSTOMIZE IT,
YOU CAN DO THAT.
USING TODAY'S
INTERNET TECHNOLOGY,
WE CAN HELP ANYONE,
ANYWHERE IN THE WORLD,
BUILD A CUSTOM HOME.
THANKS, BEN.
THANKS, BOB.
COMING UP NEXT,
BOB RYLEY JOINS US
TO INSTALL A 6-PANEL DOOR
IN THE MASTER BATH.
STICK AROUND.
Vila: ALL RIGHT.
RYLEY IS GONNA
HELP US HANG THE DOOR
HERE IN THE MASTER BATHROOM.
AND JIM DANIELS IS HERE
FROM THE DOOR COMPANY--
WOODPORT.
AND PORT MEANS--
FRENCH--
IT'S FRENCH
FOR DOOR, RIGHT?
THAT'S CORRECT, BOB.
YOU'VE CARRIED
THESE BEFORE.
THANKS, JIM.
AND THEY'RE NOT LIGHT.
NO, THEY'RE NOT LIGHT.
THANKS VERY MUCH.
TELL ME ABOUT
THE TYPE OF DOOR
THAT WE HAVE HERE.
LET'S FIRST TALK
ABOUT THE DESIGN.
THIS IS
A 6-PANEL DESIGN,
AND HISTORY HAS IT
THAT THIS DATES BACK
TO 17th CENTURY ENGLAND.
AND WHAT IT REPRESENTS
IS SUPPOSED TO BE A CROSS
WITH AN OPEN BIBLE
DOWN BELOW.
AND THE--
YEAH, YOU CAN--
A LOT OF PEOPLE HAVE
TOLD ME THESE STORIES,
BUT THAT'S IT.
THERE'S THE CROSS
AND THE OPEN BOOK.
AND THE IDEA
WAS THAT IT WOULD
HELP PROTECT YOUR HOME
THROUGH THE SAFETY OF
THE CROSS AND THE BIBLE.
THAT'S THE STORY.
OLD ENGLISH.
SO WHAT ABOUT
THE CONSTRUCTION
OF THE DOOR?
IT'S PRE-HUNG,
BUT IT'S NOT CASED OUT.
IT'S NOT CASED OUT
SO THAT THE HANGER
CAN GET THE DOOR
IN THE OPENING.
OTHERWISE IT WOULDN'T
FIT IF THE CASING
WAS ON THERE.
BUT IT'S HEAVY.
I MEAN,
IT'S A WOOD DOOR, RIGHT?
IT'S A REAL WOOD DOOR,
EXCEPT THAT WE CALL IT
A WOOD DOOR
IN A DIFFERENT FORM.
THIS IS
AN ENGINEERED WOOD DOOR
MADE OUT OF MEDIUM
DENSITY FIBER BOARD.
AH. OK. SO WHAT ARE
THE ADVANTAGES OF THAT?
MEDIUM DENSITY
FIBER BOARD
IS VERY ENVIRONMENTALLY
FRIENDLY.
IT'S MADE
WITH BY-PRODUCTS
FROM THE WOOD INDUSTRY
USING WOOD CHIPS.
THE WOOD CHIPS
ARE TURNED INTO FIBER
AND THEN COMPRESSED
UNDER HEAT AND PRESSURE
WITH A RESIN
TO FORM A VERY HARD,
DENSE PRODUCT
THAT STILL IS REAL WOOD,
HOWEVER IT WON'T WARP,
WON'T CRACK, WON'T SPLIT,
AND IT PROVIDES A REAL
SMOOTH PAINTABLE SURFACE
THAT FINISHERS LOVE.
BUT THERE ARE
RAILS AND STILES
AND PANELS HERE, RIGHT?
THE ASSEMBLY
IS IDENTICAL
TO THE TRADITIONAL
STILE AND RAIL DOOR
OF THE TURN
OF THE CENTURY
THAT THE AMERICANS
ARE FAMILIAR WITH.
IT'S NOT ONE BIG
MOLDED PRODUCT.
NO. ALL THE PARTS
ARE HANDCRAFTED
THEN HAND-ASSEMBLED IN
THE TRADITIONAL FASHION
OF ASSEMBLING A DOOR.
ONE FEAR
WITH MEDIUM-DENSITY
OVERLAY FIBER BOARD
IS THAT THE SCREWS
WON'T REALLY HOLD WELL?
MEDIUM DENSITY
FIBER BOARD
DOES HAVE GOOD
SCREW-HOLDING ABILITY,
HOWEVER, TO THE NOVICE
WHO DOESN'T UNDERSTAND
HOW TO PRE-DRILL
THE DOOR
AND PUT
THE SCREWS IN THERE,
IT CAN BE A PROBLEM.
ESPECIALLY
IF THE SCREWS
GO IN AND OUT
A NUMBER OF TIMES.
WHICH DOES HAPPEN
IN BUILDING A HOME,
BECAUSE THEY
TAKE THE DOOR OFF
FOR TILE AND CARPET
AND FINISHING.
SO WHAT WE'VE DONE IS
WE INSERT A WOOD BLOCK
THAT'S SANDWICHED
INTO OUR DOOR
SO THAT YOU HAVE
THE SCREW-HOLDING
ALONG THE ACTUAL EDGE
WHERE YOU'RE GONNA
BE HANGING IT.
BUT ALL THE OTHER
COMPONENTS ARE MDF.
AND WHAT'S THE COST
OF A DOOR LIKE THIS?
MDF, EVEN WITH
ALL THOSE BENEFITS,
TENDS TO RUN LESS THAN
TRADITIONAL WOOD DOORS,
AND A HOMEOWNER
SHOULD BE ABLE
TO PICK UP
A DOOR LIKE THIS--
THEY PRE-HANG SOMEWHERE
IN THE $150
TO $225 RANGE,
DEPENDING ON THE DESIGN.
GREAT. WHY DON'T
YOU GIVE US A HAND
HANGING IT UP.
RY--YOU HAD
A DIFFERENT WAY
OF INSTALLING IT.
WELL, IT WAS PROBABLY--
YOU ASK ANY CARPENTER
HOW TO DO A DOOR,
AND THE NEXT CARPENTER,
HE'LL FIND ANOTHER WAY
OF DOING IT.
THERE'S GOT TO BE
AT LEAST A HALF A DOZEN
DIFFERENT WAYS«.
FIRST WE WANT TO
SWING THIS ONE AROUND
SO I CAN GET
AT THE HINGED SIDE.
AND THIS IS GONNA SWING
INTO THE BATHROOM, RIGHT?
RIGHT, SO WE ALWAYS
WANT TO HANG IT
WITH THE FACE
AND THE HINGES
SO WE CAN GET
A PLUMB OFF THE HINGES.
SINCE IT DOESN'T
HAVE ANY CASING,
WHAT WE'RE
GONNA DO BASICALLY
IS APPLY SOME
PLYWOOD BLOCKS HERE.
SO YOU'VE JUST MADE
SOME LITTLE BLOCKS
THAT ARE ABOUT 4 X 5.
AND YOU'VE ADDED
A COUPLE OF DRYWALL SCREWS
ALONG ONE EDGE,
AND A THIRD ONE THERE.
YEAH, WE'LL JUST PUT
ONE ON THE BOTTOM,
ONE ON THE TOP,
AND SAME THING ON
THE OTHER JAMB.
OK, NOW, I JUST WANT
TO MAKE SURE THAT...
THERE'S ALWAYS
SOMETHING THERE HOLDING
THE JAMB TO THE D«OOR.
YOU WANT TO MAKE SURE
THAT'S OFF.
NOW WE CAN JUST
SET IT IN THE OPENING.
OK, THE FIRST THING
WE WANT TO DO
IS MAKE SURE THAT IT'S
CENTERED IN THE OPENING.
WHICH IT IS.
SO THAT YOU'VE GOT
KIND OF EQUAL REVEALS
ON EITHER SIDE.«
EXACTLY.
NOW WE'LL JUST PIN
THIS BOTTOM SIDE
RIGHT HERE.
AND THE BOTTOM
IS THE PLACE TO START.
ALWAYS
ON THE HINGED SIDE.
MM-HMM.
Vila: DOES IT HAVE
TO MOVE TO YOU?
LET'S SEE.
IT'S GOT TO GO...
JUST A LITTLE BIT
TOWARDS ME, YEAH.
HOW'S THAT?
A HAIR MORE.
TOO MUCH?
RIGHT THERE.
THAT'S GOOD.
WE'LL GET THIS SIDE.
NOW, THIS ONE'S
GOT TO COME WAY IN.
SO, WHAT YOU MEAN
IS THE SPACE
BETWEEN THE EDGE
OF THE DOOR
AND THE JAMB,
AND THE MARGIN
HAS TO BE EQUAL
FROM TOP TO BOTTOM.
EXACTLY.
THERE, THAT'S PERFECT.
RIGHT THERE.
Vila: ALL RIGHT,
SO WE'VE ONLY HAD
TO USE THE LEVEL ONCE
UP AGAINST
THE HINGED SIDE
TO MAKE SURE
THAT THINGS ARE PLUMB.
AND THEN WE'VE
CHECKED THE MARGIN
AROUND THE PERIMETER.
AND NOW WE JUST
PUT OUR SHIMS IN...
SO THAT WE GET SOME
NICE SOLID-WOOD BACKING
BETWEEN THE JACK STUD
AND THE DOORJAMB.
AND YOU SHIM AT THE TOP
AND THEN AT THE BOTTOM.
I LIKE TO GET THE SHIMS
RIGHT AT THE HINGES.
OK, NOW WE WANT
TO GET THE OTHER SIDE.
YOU'RE REALLY
GONNA NEED 2,
AREN'T YOU?
I THINK SO.
WHENEVER YOU'VE GOT A GAP
AS BIG AS WE HAVE HERE,
BETWEEN THE JACK
AND THE JAMB--
ABOUT A 1/2 INCH OR MORE--
DOUBLE UP ON YOUR SHIMS,
BRINGING THEM TOGETHER
FROM OPPOSITE SIDES.
NOW, THIS ONE I WANT
TO CHECK TO MAKE SURE
THAT THE DOOR MARGIN
IS CORRECT AT THE STRIKER,
SO I WANT TO CLOSE
THE DOOR FOR THAT.
MM-HMM.
AND THEN JUST USE
THE TIP OF THE SHIM.
PERFECT.
RIGHT. VERY GOOD.
LET'S SEE HOW IT CLOSES.
GOOD. IN A MINUTE
WE'LL TRIM IT,
BUT, JIM,
THANKS A LOT.
THANK YOU, BOB.
NEXT, WE'LL TRIM OUT THE DOOR
WITH A PICTURE-FRAME MOLDING«,
AND RYLEY HAS TIPS
FOR MITERING THE CORNERS.
NEXT TIME ON...
WORK CONTINUES AT OUR
CENTER-ENTRY COLONIAL PROJECT.
WE'LL SHOW YOU
HOW COMPUTERS CAN ASSIST
IN REDESIGNING
A HOUSE INTERIOR.
THE LAYOUT
CAN BE EASILY ADAPTED
TO MEET THE CONFIGURATION
OF A BUILDING SITE.
ALSO, WE'LL BE DOING A LOT
OF THE INTERIOR TRIM WORK.
BOB RYLEY JOINS US
TO INSTALL BASEBOARDS
AND WINDOW TRIM
IN THE MASTER BEDROOM.
AND WE'RE HANGING
A 6-PANEL DOOR
IN THE MASTER BATH.
SO DON'T MISS IT.
THAT'S NEXT TIME
HOME AGAIN.
NEXT TIME ON...
IT'S DESIGNING HOMES
WITH COMPUTERS,
HANGING A DOOR,
AND INSTALLING WINDOW TRIM
AND BASEBOARDS.
DON'T MISS IT.
ALL RIGHT, WE'RE GONNA
REJOIN BOB RYLEY
AND DO SOME MORE
FINISH CARPENTRY,
BUT FIRST,
UP AT THE TOP,
WE REALLY HAVEN'T
TAKEN A CLOSE LOOK
AT WHAT'S UP HERE.
THE SECOND FLOOR
HAS A TOTAL OF 4 BEDROOMS,
AND THE ONE AT THIS END
IS EN SUITE.
IT HAS ITS OWN BATHROOM
AND A BIG WALK-IN CLOSET.
THEN THERE
IS A LARGE SECONDARY BATHROOM
THAT WILL SERVE
THE 2 BEDROOMS
THAT ARE HERE
ON EITHER SIDE.
NOW, WE HAVE ONE BEDROOM
THAT'S LIKE A NURSERY SIZE.
IT'S JUST ABOUT 10 X 12.
AND A LARGE GUEST BEDROOM
ON THIS SIZE,
WHICH I THINK
IS ABOUT 12 X 15.
SO THERE'S LOTS
OF OPPORTUNITIES
FOR THINGS HERE.
THE FLOOR,
THE BEAUTIFUL OAK FLOOR
THAT WE HAVE DOWNSTAIRS
CONTINUES THROUGH
THIS KEY HALL
INTO THE MASTER BEDROOM.
AND WE'VE BEEN WORKING
ON THE MASTER BATHROOM
ENTRY DOOR«.
AND, BOB, ARE YOU
GETTING READY
TO CUT THAT?
YEAH, JUST THE BOTTOM
OF ONE MORE TO GO HERE.
OK. NOW, WHAT KIND
OF TRIM STOCK IS THIS
THAT WE'RE USING?
THIS IS NUMBER...
ACTUALLY, IT'S
FINGER-JOINTED PINE.
PRE-PRIMED.
AND IT'S...
IT'S A PICTURE-FRAME
INSTALLATION.
IN OTHER WORDS,
IT'S MITERED CORNERS.
I JUST WANT TO BACK
THIS OFF A LITTLE BIT
TO MAKE SURE THAT
THE FINISHED EDGES
ARE GONNA HIT.
THAT IS
A CARPENTER'S TRICK.
WHEN YOU MAKE A CUT
LIKE THAT AT 45 DEGREES,
IF YOU PLANE A LITTLE
BIT OFF THE BACKSIDE,
IT WILL ENSURE
THAT THE FRONT SIDE
LOOKS REALLY TIGHT.
THAT SHOULD DO IT.
NOW, DO YOU HAVE TO
DO THAT ON BOTH SIDES,
OR JUST ON ONE?
[INDISTINCT]
I'VE ALREADY GOT IT
ON THAT ONE.
IT'S A GOOD IDEA
TO GET IT
A LITTLE BIT
ON ALL OF 'EM.
NOW, DON'T YOU
HAVE TO PUT A LEVEL UP
TO MAKE SURE
IT'S PLUMB?
WELL, WE KNOW
THAT THE JAMB IS PLUMB
BECAUSE THE DOOR'S
WORKING PERFECTLY,
SO ALL WE REALLY NEED
TO DO IS FOLLOW THIS MARGIN
ALL THE WAY
DOWN THE DOORJAMB.
AND THAT'S ABOUT
3/16 OF AN INCH
REVEAL, RIGHT?
RIGHT DOWN HERE.
WE JUST FOLLOW THAT
RIGHT STRAIGHT DOWN.
BASICALLY
USING THE EYEBALL.
STRAIGHTEST TOOL
ON THE JOB.
MM-HMM.
SO THAT'S THE BEST
NAILING PATTERN,
ON THE VERY EDGE
IN AND OUTSIDE?
YEAH, I LIKE TO GET 5.
ONE IN THE MIDDLE,
TOP AND BOTTOM,
AND THEN IN-BETWEEN.
Vila: NICE AND TIGHT.
Ryley: OK. A LITTLE BIT.
GET SOME GLUE ON THAT.
LET ME JUST WORK
THOSE TWO TOGETHER.
GOOD. GET THE TOP ONE.
ALL RIGHT.
NOW, THE BASEBOARD
THAT'S BEING INSTALLED
IS THIS MEDIUM-DENSITY
FIBER BOARD PRODUCT,
WHICH GOES VERY QUICKLY.
RIGHT, 'CAUSE IT'S
GOT THE SECOND PIECE
ATTACHED TO IT.
SO THERE'S A BUTT CUT
THAT GOES RIGHT AGAINST
THE SIDE OF IT.
ARE YOU GONNA MITER
THE INSIDE CORNER HERE?
NO, WHAT WE'RE GONNA DO
IS PUT A COPE
ON THAT INSIDE CORNER.
Ryley: LET ME TAKE SOME
OF THE MEAT OUT OF THAT.
SO THAT YOU DON'T HAVE
TO DO ALL THAT BY HAND.
RIGHT. THE REST
OF THAT WE'LL TAKE OUT
WITH A COPING SAW«.
Vila: SO YOU JUST
LET THAT PROFILE
BE YOUR GUIDE.
THAT'S RIGHT.
ALL RIGHT.
LET'S PUT THEM
OVER IN THE CORNER.
AND SEE HOW
THEY'RE GONNA FIT.
Vila: OH, YOU GOT IT
ON THE FIRST TRY.
VERY GOOD.
WHEN WE COME BACK, WE'LL
BE TRIMMING OUT THE WINDOWS
IN THE MASTER BEDROOM,
SO DON'T GO AWAY.
ALL RIGHT, WE'RE
USING THE SAME PROFILE
TO TRIM OUT ALL
THE WINDOWS IN THE ROOM.
AND, BOB, WHICH PIECE
GOES IN FIRST?
FIRST IS
THE WINDOWSILL ITSELF.
NOW, THIS CAME
WITH THE TRIM PACKAGE
FOR THE WHOLE HOUSE«.
AND THIS IS MADE
OUT OF POPLAR.
YEAH, IT'S ALL POPLAR,
GONNA BE PAINTED.
AND IT HAS
TO BE PREDRILLED
AND THEN--
IS THAT A 10 OR A 12?
THAT'S A 10-PENNY.
JUST NAIL IT RIGHT
INTO THE JACK STUDS.
AND NOW THE CASINGS.
SAME REVEAL AS THE DOORS?
YUP. IT'S THE EXACT
SAME THING.
NOW, WHY IS IT IMPORTANT
TO ALWAYS ADD THAT GLUE
AT THE
MITERS?
WELL, IT'S JUST
GONNA HOLD EVERYTHING
NICE AND TIGHT TOG«ETHER
AND PREVENT IT
FROM MOVING AROUND ON YOU.
EXACTLY. NO NEED TO TRY
TO CLAMP OR ANYTHING.
JUST GLUE IT
AND NAIL IT.
OK, AND NOW
THE LAST PIECE
IS THE APRON.
THE APRON, WHICH
DRESSES UP THE BOTTOM.
RIGHT.
OK, NOW,
THOSE 2 RETURNS.
YOU'VE GOT THEM PRECUT--
THE LITTLE PIECES
THAT GO ON THE END
SO THAT BASICALLY
THEY ARE RETURNING
ON THEMSELVES.
EXACTLY.
AND THAT GETS
A LITTLE BIT OF GLUE.
THAT JUST GETS GLUED
RIGHT IN THERE.
AND THE SAME THING
ON THIS SIDE.
AND YOU FINISH IT,
'CAUSE WE ARE OUT OF TIME.
HOME AGAIN
NEXT WEEK
WHEN WE'LL BE WORKING
ON FINISH CARPENTRY,
WE'LL INSTALL
A 4-PART CORNICE MOLDING,
AND VISIT
THE NORTH BENNET STREET SCHOOL.
TILL THEN, I'M BOB VILA.
IT'S GOOD
TO HAVE YOU
HOME AGAIN.
|
Related Tips
Related Videos
