|
|
| Control cut variable rate feed system
|
|
The patented control cut variable rate feed system enhances precision and ease of use by controlling the rate at which a radial saw's cutting head can advance through a workpiece. Variable speed control allows the user to select the proper feed rate for the workpiece material. |
| Control fittings
|
|
The device that controls the rate of flow and pressure in a fluid system. |
| Control joint
|
|
(1) When installing a large span of wallboard, a space is filled with a preformed metal piece, which permits expansion and contraction. (2) Masonry wall groove constructed as a control for expansion cracking. (3) Any joint which is made between structural sections to allow for differential movement. |
| Control variable
|
|
Environmental element that remains unchanged and strongly influences real estate valuations. |
| Controlled growth
|
|
The imposition of restrictions on the amount or type of new development in an area. |
| Controller
|
|
Device to control power that goes to an electrical motor. |
| Convection
|
|
Air naturally circulated by differences in temperature. Colder, denser air falls and displaces the lighter, warm air. |
| Convector
|
|
Heating device, which is open at the top and bottom so that air may pass through the openings and over interior tubes, to be heated by hot water, which passes through those tubes. The heated air then flows out into a room. |
| Convector cover
|
|
Concealment for a convector so that it is more attractive. |
| Convenience outlet
|
|
Also called an electrical outlet, appliances and other electric devices are plugged into this 120-volt receptacle. |
|
|
|
|
|
