|
|
| SCREW PITCH GAUGE
|
|
Gauge that checks the number of screw threads per inch on a screw. |
| SCREW TEK
|
|
Sheet metal screw that is fully threaded with a tip in the shape of a drill bit and either a Phillips or hex head, which is used to fasten heavy sheet metal. They are zinc-plated and available in various sizes. |
| SCREW THREAD MICROMETER
|
|
Instrument which identifies the diameter of a threaded rod to the closes thousandth of an inch, which is used when great precision is needed. |
| SCREW THREADS
|
|
The threads are the raised spiral ridges that run down the shaft of a screw. When the screw is turned, the threads cut groves into the interior of the material, fastening it in place. |
| SCREW-TYPE RIP FENCE
|
|
The screw-type rip fence, typically found on table saws, securely locks the fence into place when ripping. |
| SCREWDRIVER
|
|
The function of the screwdriver is simple. To drive and withdraw threaded fasteners. Different types of blade tips are used with matching recesses on threaded fasteners. Using the wrong style of screwdriver could damage the tool and/or the fastener. The handle design of better units provides a more comfortable operation with less effort. |
| SCREWDRIVER BIT
|
|
Screwdriver bits can be used on both corded and cordless screwdriver or driver/drill units. Screwdriver bits are available for slotted, torx¨, phillips, clutch, robertson (square recess), and hex fasteners. |
| SCREWED OFF
|
|
Expression for using a few screws to hold material in place and then screwing all of the screws simultaneously. |
| SCREWHOLDING SCREWDRIVER
|
|
The screwholding screwdriver is designed to hold slotted and phillips screws while starting the screw into the workpiece. |
| SCREWS
|
|
Threaded fastener that is driven into the substrate by turning. |
|
|
|
|
|
