|
|
|
 |
| Always wear eye protection when using a table saw or power tools. Follow the instructions that came with the table saw. |
|
 |
|
|
|
Click to enlarge + |
Step 1: Transfer the jig pattern.
Transfer the jig pattern information to a piece of medium density fiberboard (mdf). Use a combination square to ensure an accurate line.
 Mark the jig pattern on a piece of mdf.
|
|
Click to enlarge + |
Step 2: Cut out the jig pattern.
Use a band saw or jig saw to cut out the pattern.
Cut the pattern out with a band saw.
|
|
Click to enlarge + |
Step 3: File the pattern.
Use a file to create a smooth, clean pattern.
Use a file to clean up the pattern.
|
|
Click to enlarge + |
Step 4: Test out the jig.
Try out the jig. Hold the jig against the fence. Rest the stock against the jig with the jig stop facing away from you. Push the stock with the push stick.
Push the stock through with the push stick.
|
|
|
