 
|
 |
How to Repair Broken Tile, Part Four
Cracked and broken bathroom tiles are easily removed and replaced. There may be water damage to the backing behind the tile, ... |
|
|
How to Repair Broken Tile, Part One
Cracked and broken bathroom tiles are easily removed and replaced. There may be water damage to the backing behind the tile, ... |
|
|
How to Repair Broken Tile, Part Three
Cracked and broken bathroom tiles are easily removed and replaced. There may be water damage to the backing behind the tile, ... |
|
|
How to Repair Broken Tile, Part Two
Cracked and broken bathroom tiles are easily removed and replaced. There may be water damage to the backing behind the tile, ... |
|
|
How to Repair Chipped Corners in Drywall
Chipped and damaged wall edges are ugly but easy to repair with a little joint compound and a smooth, sanded finish. |
|
|
How to Repair Cracks in Drywall
Settling cracks can be easily repaired and sanded for a smooth finish. |
|
|
How to Tape and Finish Drywall Seams
Smooth, taped seams give walls a finished look. Whether you use paper or adhesive tape for your walls, the taping and ... |
|
 |
In-Wall Speakers
When installing in-wall speakers, use a drywall saw to cut the hole. A utility knife will make the cleanest cuts in drywall, ... |
|
 |
Installing a Cement Backerboard in the Bathroom
Bob meets Larry in the master bathroom, where he is installing a cement backerboard to the walls and floor of the shower stall ... |
|
|
Installing Drywall with Wallboard and Taped Joints
Bob is back on the first floor of the barn with Bill Reid from US Gypsum where the crew is installing drywall. This is a ... |
|
|
Installing Insulation and Plastering
House two of the Elmwood project. Bob Ryley and Tim Grether of Owens Corning install insulation and vapor barrier in bathroom. ... |
|
|
Installing Mildew and Mold Resistant Drywall
Bob is joined by Thad Goodman of Georgia-Pacific as their DensArmor Plus fiberglass-faced drywall is installed in a Mashpee, ... |
|
|
Installing Mold-Resistant Drywall
Georgia Pacific DensArmor drywall is being used throughout the addition. The face of this drywall is made of fiberglass so ... |
|
|
Installing Mold-Resistant Fiberglass Drywall
John McEvoy of Thorough Construction is leading the crew for the drywall installation. They have chosen DensArmor Plus, a ... |
|
|
Mixing Plaster
Bob and Chris Vila visit the plastering contractor at the Waterfront Warehouse Rehab project, and get a lesson in plaster ... |
|
|
Modular Home Construction Basics
In this segment, Bob Vila visits the Simplex Industries modular home plant in Scranton, Pennsylvania, where the Home Again ... |
|
|
Mold Resistant Wallboard Installation
In this scene, Bob meets with Thad Goodman from Georgia-Pacific. Goodman is installing a new wallboard product called ... |
|
|
No-Coat Drywall Corners
If you've ever done your own drywall, you know the corners are the tricky part. These no-coat drywall corners are ready made ... |
|
 |
No-Coat Pre-Finished Drywall
Behind the Scenes - Habitat for Humanity |
|
|
Painting Plaster
If you're repainting older plaster, take the extra prep time to make the effort worthwhile. Use patching plaster to smooth ... |
