Step 4: Transfer hinge measurements and cut markings for the hinge plate
Transfer the hinge measurements to the door and mark the location with a pencil. You can use a hinge profile cutter tool to stamp out the location and depth of the hinge plate area. Hammer the cutter tool into the wood until it is flush. This will give you a standard depth cut for a door hinge. Most profile cutters have a scribing tool to run across the edge of the door to show how deep you will chisel.
 Use the scoring guide on the hinge tool to mark the depth of the hinge mortise.
|
|
|
 |
| Use safety precautions when using a wood chisel. Always wear safety goggles. Hold the material to be chiseled firmly in a vice or hold. Chisel away from you and keep chisel edges sharp. |
|
 |
|
|
|
|
