Home Office Wiring Connections

Page 1 of 2 ( 1 2 )

Structured wiring is designed to make data, phone, fax, cable, satellite and broadband connections accessible through household outlets. Upgrading to Structured Wiring The days of basic phone and electric service are quickly disappearing. Working at home increasingly requires high-speed Internet access and networking. Those with high-speed Internet access can maximize speed and performance with a move to structured wiring. Structured wiring is fast becoming the backbone of home offices. It is a data delivery system that can carry phone, fax, broadband, networking, and video/television technologies. For example, phone and fax communications are predominantly analog, but voice over Internet protocol (VoIP)—a technology that allows you to make phone calls using a broadband Internet connection—is gaining momentum. With a structured-wiring system, your home will be VoIP-ready when it comes to you. Structured-Wiring Systems The structured-wiring system is made up of three parts: A panel or module where all outside service enters the home, wires and cables throughout the house, and connecting hardware. Structured-wiring systems can come prepackaged, but a bundle approach without a plan can leave you with wasted outlets or no outlet where you need one. Develop a home-office power plan before you wire. It should detail where the computers, printers, phones and media are set up and where conference calls and media viewing will happen. A system is only as fast as its slowest component. The data capacity of copper wire is designated by the category, or Cat, of the wire and determined by its construction and how the wires are twisted. The main difference between the wiring designations is the frequency the wire is capable of transmitting. Frequency is rated in megahertz (MHz) also known as bandwidth. Cat3, for instance, is rated up to 16 MHz while Cat5 is rated at 100 MHz. If you are considering structured wiring, it’s probably best to consider EIA-TIA 570-B. The residential telecommunications cabling standard was developed in 2004 as a voluntary guideline by the Electronic Industries Association (EIA) and the Telecommunications Industry Association (TIA). “The 570-B is a set of specifications and best practices that detail the technologies to install and the proper methods for the installation,” says Ian Hendler, director of business development for Leviton Integrated Networks, Little Neck, N.Y. The 570-B recommends a minimum of Cat5e (enhanced) for communications. Coaxial cable, used primarily by the cable television industry and widely used for computer networks, as well as RG6, a coaxial cable system recommended by

...Continued - Page 1 of 2 ( 1 2 )
Next Page >