Freeze-proof outdoor faucets are the best replacement option in areas prone to freezing and low temperatures. The project requires drilling and soldering, so be sure you are confident taking on the project.
Step 7: Solder the coupler and the new copper pipe. Place the new length of copper pipe back into the vise. Use a flux brush to apply a coating of flux to the end of the pipe. Apply flux coating to the insides of both ends of the coupler as well. Put the coupler on the end of the copper pipe, and use a torch to heat the coupling. When the flux starts to melt, rub solder against the edge of the joint. As soon as the solder starts to melt, remove both the solder and the torch. Do not continue to heat the joint. Rub solder against the edge of the joint when the flux starts to melt.
Never use an open flame to thaw a frozen pipe. You can easily start a fire and damage the pipe and fittings. When using a torch or a drill wear protective eye gear, clothing and gloves.
