View ChannelsFeatured: Deck, Porch & Patio
View ShowroomsFeatured: Chadsworth's - 1.800.COLUMNS

BobVila.com

Home

How to Replace a Toilet

Watch the Video of this Step By Step. Watch Video

DIFFICULTY RATING:

(2 out of 5 - Easy)

Replacing a toilet is an easy job that requires basic tools and skills and can usually be accomplished in under an hour.

Step 1: Turn off the water supply
Turn off the toilet's water supply valve just below the tank. Flush the toilet to empty the tank. Hold down the lever to allow most of the water to run out of the tank.

Turn the water supply handle clockwise to turn off the water supply.

Step 1 of 12 (View Full Step by Step)

Adjustable wrench (Buy)	Bucket (Buy)
Caulk (Buy)	Commercial portland cement grout (Buy)
Commercial portland cement grout (Buy)	Gloves (Buy)
Goggles (Buy)	Goggles (Buy)
Hacksaw (Buy)	Hacksaw (Buy)
Putty knife (Buy)	More ...

Make sure water to the toilet is completely turned off before proceeding. If the shut-off valve does not completely stop the water flow, temporarily turn off the water to the entire house. This information is offered only as a guideline. Always follow the instructions that came with your new toilet.

Watch the Video of this
Step by Step.
Watch Video

Text by Dan Newberry
BobVila.com