|
|
|
|
|
|
|
DIFFICULTY RATING:
(2 out of 5 - Easy)
Routine gutter repair and inspection is vital to the performance of your home's water management system. Inspect for blockage, holes, cracks and sags.
|
Step 4: Repair cracks.
Look for cracks in the overlapping sections of gutter. If a loosening section or seam is found, first clean the area thoroughly. Drill two 1/8-inch holes into the bottom of the overlapping sections and one on each side as well. Use a pop riveter to pop rivet the sections together. Lay down a coat of gutter compound over the seam and all the rivets. Use a stiff brush to spread the compound over the entire seam, extending coverage up the side of the seam and out 1 inch from either side of the seam.
 Pop rivet the sections together.
|
|
|
 |
| When working on ladders, be sure to follow all safety instructions provided by the manufacturer. Always wear safety glasses and other safety equipment when doing all your projects. |
|
 |
|
|
|
|
© 2008 BobVila.com
|
|
|
|
|
|
