Home > How To Library > Step-by-Step How-Tos Videos > Plumbing > Filters > Install a Below-Counter Water Filtration System

Install a Below-Counter Water Filtration System
Print VersionBookmarkEmail this page to a friend.
Watch the Video of this Step By Step. Watch Video

DIFFICULTY RATING: (2 out of 5 - Easy)

With a little planning and a handful of common tools, a system can be installed and working in no time.
Step 7: Connect the filter supply line to the filter supply valve
 Attach the filter supply line to the filter supply valve. This line runs from the filter to the filtration faucet. Follow the instructions that come with the system to attach and secure the line to the valve, as each system varies. Tighten the nut over the supply line by hand and wrench until snug. Do not overtighten.
Follow instructions to connect the filter supply line to the filter supply valve.
Step 7 of 8 (View Full Step by Step)


Adjustable wrench (Buy) Drill and counterbore bit (Buy)
Screwdriver (Buy) Tape measure (Buy)
Water filtration system (Buy)
The water connection must be closed before installing the water filtration system. Know what is behind the cabinet before drilling.

Watch the Video of this
Step by Step.
Watch Video










 
About | FAQ | Contact | Sitemap | Privacy Policy | Terms of Use | Help
© BobVila.com 2008