|
 |
Beadboard Wainscoting
To achieve a Victorian look on an interior wall, try a beadboard wainscot. You can buy beadboard at your local lumberyard. ... |
 
|
 |
Bench Construction
The wood has arrived for the perimeter benches and Bob and Ryley begin their construction. The wood is a cypress, which is ... |
|
|
Bent Nails
Bent nails often result from poor hammering technique. However, they can also be caused by a dirty hammer face, especially ... |
|
|
Blue Board and Cabinet Installation
Bob explains the construction and installation of cabinets and installation of blue board on a long, gradually curving wall. ... |
|
|
Building a China Cabinet
Bob confers with cabinetmaker Brian Comeaux as he builds then installs a dining room china cabinet for the Studio City bungalow. |
|
|
Building a Composite Deck
Bob joins Wes Lohr of Lohr Construction as they install the deck framing and deck on one of the Mashpee, Massachusetts houses. ... |
|
|
Building a Door
Bob meets with Ryley and builds a door jig to and a plank door with beadboards. Ryley oultines the door construction process ... |
|
|
Building a Fireplace Mantle
Ryley instructs Bob on building a mantle around the brick fireplace. |
|
|
Building a Free Floating Deck
Bob visits a job site where a deck is being added onto a house. Due to flood plain regulations, the deck cannot be attached to ... |
|
|
Building a Porch Railing
Ryley helps build a porch railing on the Roxbury project. Bob discusses the building codes that pertain to the rail and ... |
|
|
Building a Redwood Deck and a Redwood-Cedar Fence
Bob helps Ryley build a redwood deck. Bob emphasizes the use of stainless steel nails when working with redwood due to the ... |
|
|
Building Cabinets
Bob visits Todd Allen's cabinet shop and helps him mill and assemble the cabinets for the Loft Conversion Project. |
|
|
Building the Backyard Deck
Bob in the backyard of the Medford restoration project where Charlie and Matt are finishing up the picture framing for the ... |
|
|
Building the Farmers Porch
Larry Begins by installing the ledger to the frame of the home for the new deck. Bob talks to the contractor regarding the ... |
|
|
Building the Rooftop Deck Using Ipe
Bob is up on the roof of the Waterfront Warehouse Rehab project building to observe the deck installation. The hardwood deck ... |
|
|
Butcher Block Care
Bob \meets with Joel Scanlon who installs legs on a butcher block top and explains how to care for a butcher block. |
|
|
Choosing A Drill
Power drills come in 3 sizes; 1/4, 3/8, and 1/2-in. Size refers to the largest capacity of bit that will fit in the drill's ... |
|
 |
Cut Nails Bring Authenticity to Wood Floors, Walls and Cabinets
A wide-planked wood floor or wood-paneled wall distinguishes itself with hand nailing using square, cut nails. A machine cut ... |
|
|
Deck Nailing
When building a deck, always nail a thinner member to a thicker member. Hot-dipped zinc-coated nails are a good choice. For ... |
|
|
Deck Nails
Take extra care when nailing your deck. Instead of driving the nails completely in with a hammer. Use a nail set to finish off ... |
