|
Designing and Building a Custom Shower
By: impdirect
Project Type: Step By Step Category: Plumbing
Building a Custom Shower
Custom Shower Systems
When building your dream bathroom, creating a custom shower is a rewarding and luxurious upgrade you’ll appreciate for years to come.
|
|
Branchburg, NJ Stucco repair
By: EmpaConstruction
Project Type: Step By Step Category: Repairing
Steve contacted Empa construction to repair the damaged stucco and rotting wood on the exterior of his house.
|
|
Caliente Cab
By: EmpaConstruction
Project Type: Step By Step Category: Siding
Caliente Cab contacted Empa Construction to install stucco over the exterior brick. Empa construction fastened wire lath over brick with a nail gun. Applying the base coat over metal lath came next. After a couple days of drying, Empa Construction
|
|
potential
By: sparky12
Project Type: Step By Step Category: Exterior Features & Spaces
exterior paint ideas
|
![]()
|
PEX Installation
By: gtglobe
Project Type: Step By Step Category: Plumbing
4-STEP INSTALLATION GUIDE
Whether for potable water, radiant heating systems, or industrial use, installing GTPEX® is always fast and easy.
Here is our unique GTPEX® 4-Step Installation Guide:
|
![]()
|
Installing roof sheathing with the GripHClip
By: gripman
Project Type: Step By Step Category: Framing
#1 Select the size GripHClip that fits your thickness of OSB/plywood. GripHClips are designed to work well within the full tolerance of the thickness. As an example 1/2" plywood is in spec. if it is as thin as .469" or as thick as .531".
#2 After
|
|
Garage Ceiling 23' w x 24' l
By: PHILIPHD
Project Type: Step By Step Category: Garage
The ceiling in my garage is drywall and was sprayed with popcorn. This was done by the previous owner and builder. Whomever sprayed the ceiling oversprayed and the popcorn is flaking off in spots and making a mess.
I am considering covering th
|
|
|
no electric in my atv
By: stickershock
Project Type: Step By Step Category: Electrical
While it is a bit of a stretch to contribute this story to the forum, it is something that any home owner might run into.
The first step in fixing my electrical problem was to see if the battery was dead. It was not.
The next step was to turn
|
|
router table built from magazine plan
By: stickershock
Project Type: Step By Step Category: Hardware Tools
My home made router table came from a 1985 Woodsmith magazine article which a friend bought for a $1.95. It was titled: "Woodworking Plan Booklet 12" and was very detailed with plans, drawings and a nice step by step article written by the author a
|
|
Installing Thin Stone Veneer over Metal Lath
By: StoneVeneer
Project Type: Step By Step Category: Masonry & Paving
How to install thin stone veneer over a stud wall substrate:
(make sure to check with engineer for every job)
1. 2"x6" Wood Studs spaced no wider than 16" on center
2. Plywood/OSB
3. 3.4lb self-furring paper backed expanded metal lath such as T
|
