- Tools & Workshop >
- Bob Vila Radio: Drill Drivers
Bob Vila Radio: Drill Drivers
Did you know the right drill bit can make or break the job?
Listen to BOB VILA ON DRILL DRIVERS, or read text below:
Most of us are familiar with all-purpose twist bits that work on wood, plastic and light metal. For quick-and-dirty jobs, auger bits have large flutes for removing the chips as you drill.
For more precise work, a brad point bit stays in position better and a forstner bit is great for boring clean, flat-bottomed holes. Spade bits make holes up to an inch and a half in diameter, adjustable bits go to three inches. And hole saws, which look like cups with a serrated edge, go up to six inches in diameter.
You never want to try to use wood bits on anything but wood, so it’s a good idea to have a set of tile bits and masonry bits in your toolbox as well.
Check your drill’s manual before you buy bits to be sure they’re compatible, and look for a quick-change chuck, or adapter, to save time changing them on the job!
Bob Vila Radio is a newly launched daily radio spot carried on more than 60 stations around the country (and growing). You can get your daily dose here, by listening to—or reading—Bob’s 60-second home improvement radio tip of the day.
For more on drill drivers, consider: