Get Help from Bob Vila
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries
It’s your call when it comes to selecting toilets, sinks, and other plumbing fixtures for your renovation. But a couple of very popular options might figure into your thinking. One’s an old standard that’s been reborn, the other a new engineering marvel.
The pedestal sink. Pedestal sinks were once almost a given in a bathroom. They went out of favor for decades (the advantages of the vanity cabinet for storage are obvious) but have come back into vogue. They’re not the answer for everyone, but they can be very handsome.
As with virtually any household product, the price range is broad. With luck you may come across a slightly pitted but perfect usable sink at salvage for less than $100; new models start at about the same price. At the top of the line, you will find meticulously restored or newly designed models for $3,000 to $4,000! The choice is yours.
Low-flow toilets. Low-flow toilets are designed to use less water. While older designs used as much as 7 gallons per flush (gpf), low-flow models typically use a maximum of 1.6 gpf, the amount mandated first in Massachusetts then in California and subsequently in other states. Most of the low-flow toilets now on the market resemble conventional toilets, while matching their performance. Some of them, however, are loud, relying upon a plastic compression tank concealed within the vitreous china tank that uses the pressure in the supply line to force the water out of the tank, producing a whooshing sound. Even if you are not required by code to install low-flow toilets, it’s an environmentally sound approach to do so.
The compression tank in a low-flow toilet is usually hidden by the vitreous china top of the tank.