Get Help from Bob Vila
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries
Removing walls that don’t have a function and making spaces work together is a great way to improve the traffic flow and the view in your home.
Listen to BOB VILA ON LOAD-BEARING WALLS or read the text below:
There are two kinds of walls: load-bearing walls and non-load-bearing walls. Knowing which is which is critical before you grab that sledgehammer.
You can do anything you like to a non-bearing wall, but if you remove or even cut into a load-bearing wall without adding temporary supports first, you can literally bring down the house.
Check the joists or rafters in your basement or attic; if they run perpendicular to the wall in question, it’s almost certainly a bearing wall. If they run parallel, it’s not.
If you still have doubts, don’t wing it: ask a reputable builder to have a look. If you’re planning major work, save yourself some hassle (and some surprises) by having a structural engineer sign off on the plans before you go for your building permit.
Bob Vila Radio is a newly launched daily radio spot carried on more than 60 stations around the country (and growing). You can get your daily dose here, by listening to—or reading—Bob’s 60-second home improvement radio tip of the day.
For more on construction, consider: