- Walls & Ceilings >
- Bob Vila Radio: Metal Studs
Bob Vila Radio: Metal Studs
If your next home renovation requires framing new walls, think twice before you reach for those ubiquitous two-by-fours. You might want to consider steel studs.
Listen to BOB VILA ON METAL STUDS, or read text below:
“If your next home renovation requires framing new walls, think twice before you reach for those ubiquitous two-by-fours. You might want to consider steel studs.
Because they’re basically just a steel shell, metal studs weigh less and are easier to transport than wood. It’s dimensionally stable: it doesn’t bow or twist like stud lumber can. and you can cut it with tin snips or cut several at once with a carborundum blade on a power saw, saving lots of time and effort on the job.
Steel is a great choice if you’re finishing a basement, since it won’t mold, catch fire, or attract insects. Studs twist into place inside the top and bottom channels, making it easy for one person to assemble a frame and screw it together quickly with self-tapping screws, no hammering required.
Steel studs are best for interior walls. They do transfer some heat and lower your insulation value. The cost of steel framing fluctuates, but it could wind up costing you half what lumber would, and you can recycle it when the time comes.
Get more info at BobVila.com… and right here at home with me, Bob Vila!”
Bob Vila Radio is a newly launched daily radio spot carried on more than 60 stations around the country (and growing). You can get your daily dose here, by listening to—or reading—Bob’s 60-second home improvement radio tip of the day.
For more on studs, consider:
Metal Stud Framing (video)
Installing an Impact-Resistant Front Door, Electric Wiring with Metal Studs, Plumbing with Metal Studs and a Concrete Slab (video)
Three Ways to Find a Wall Stud (Without Fancy Equipment)