Bob Vila Radio: Painting Masonry

If your to-do list includes painting brick or concrete, keep in mind that masonry requires some special treatment.

Painted Brick

Photo: hallcopainting.com

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

Listen to BOB VILA ON PAINTING MASONRY, or read the text below:

Start by making sure any loose and flaking paint is removed according to your state’s regulations on paint removal.  Brush or hose it clean, checking for loose mortar and spalled brick as you go.  Seal any gaps and make repairs, allowing plenty of time for new mortar to cure before you paint.

Don’t skip the primer, even if you’re just painting the basement; priming helps you get more even coverage with less paint. Tinting the primer close to the paint color you plan to use, may mean you only need one finish coat. To seal the surface completely, use a waterproofing masonry conditioner or primer.

Sealing moisture into a wall, however, can cause paint to bubble later, so in damp areas, you might consider a breathable water-based masonry paint containing sodium silicate to let vapor in or out as needed.

Bob Vila Radio is a newly launched daily radio spot carried on more than 60 stations around the country (and growing). You can get your daily dose here, by listening to—or reading—Bob’s 60-second home improvement radio tip of the day.

For more on masonry, consider:
Cold, Masonry, and Brick Chisels
New Brick Basics: Maintenance, Care, and Cleaning
Repurposing Brick to Make a Walkway