Bob Vila Radio: Removing the Knockouts in Electrical Boxes

By Bob Vila | Updated Sep 16, 2020 7:18 PM

We may earn revenue from the products available on this page and participate in affiliate programs.

Knockouts are partially stamped, quarter-size openings in the electrical boxes that service such things as outlets and switches. Once removed, a knockout allows electrical wires to be run in and out of the box.

How to Remove Knockouts from Electrical Boxes

Photo: homedepot.com

mp3 file

Listen to BOB VILA ON REMOVING KNOCKOUTS or read the text below:

In the average electrical box, there are several knockouts, each with one or two attachment points resembling small bumps. Remove the knockout that would give the wires the straightest shot—that is, the knockout that would require the least amount of bending on the part of the wires.

To remove a knockout, position the tip of a regular, blade-tip screwdriver just inside the edge, on the side opposite the attachment points. That ought to partially dislodge the knockout, allowing you to remove it the rest of the way by twisting back and forth until the attachment points snap.

When you’re running wire in or out of a knockout, be sure to install a strain-relief clamp, an add-on that not only holds wires in place, but also keeps them from chafing against the edges of the electrical box. Multiple strain-relief options exist; check your local home improvement center.

Bob Vila Radio is a 60-second home improvement radio tip of the day carried on more than 186 stations in 75 markets around the country. Click here to subscribe, so you can automatically receive each new episode as it arrives—absolutely free!