Bob Vila Radio: Tool Tip – Power Sanders

Good sanding can make or break a woodworking project, so every do-it-yourselfer should have a power sander in the workshop.

Random Orbital Sander

Photo: zo-d.com

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

Listen to BOB VILA ON POWER SANDERS or read the text below:

For around 50 bucks, a 5″ random orbital sander means you don’t have to sand your work by hand. 6″ sanders yield a lot more surface area, so they work a lot faster, but the stronger motor they require boosts the price by around $100—still a great deal versus hand sanding.

If you’re sanding large areas or lots of them, a belt sander is king. You can clamp boards together and hit them with the belt sander all at the same time for smooth uniform edges, or pre-sand whole boards before you cut them to reduce finishing time later.

Stock up on sandpaper refills that work with your sander, and don’t scrimp on the quality. Sharper grit is more expensive, but it works much faster and lasts longer. Cheap sandpaper will wear down faster, fill up with sawdust, and shred in no time. So it’s not really a bargain.

Bob Vila Radio is a newly launched daily radio spot carried on more than 60 stations around the country (and growing). You can get your daily dose here, by listening to—or reading—Bob’s 60-second home improvement radio tip of the day.

For more tool tips, consider:

Tin Snips
Nail Guns
Pliers