I live in South Florida and I have an enclosed screened porch (700sq ft) under an insulated roof (6in). I would like to convert it to a sunroom. I ...
COMMUNITY FORUM: MISCELLANEOUS
we have an elderly friend thta has let a tom cat in and he has sprayed all over the hoiuse.. it's a log cabin with 3/4 inch flooring covered by ber...
How do I go about cutting hole in brick wall for kitchen windows. What about the brick and mortor above the cut out? Do I need a support above the ...
I am building a house and I am interested in doing an exterior that I have seen on several new houses recently. It looks like stucco over brick an...
I'm attempting to remove the front access panel on my hot water heater but one of the screws just keeps turning. I was told that the threads were s...
I am removing vinyl foor tiles on painted wood floors. I read that Motsenbocker's Lift off 2 worked for one person, I can't find a store that sells...
I have a Geneva kitchen and need to ad three cabinets, so I need three doors 18" x aprox 20"H with metal handels (see photo), hinges and locks... I...
I have a coleman furnace and it has an attic fan. You can set it for automatic or continuous. Is there anyway to shut this off? It gets very cold h...
I'm looking for a better way to use the limited space in my very shallow (17"deep) coat closet, by installing a perpendicular rod, as opposed to a ...
Someone please tell me how to hang some heavy shelves on a hollow wall? I tried using hallow wall anchors and they did not work. They pulled right ...
The spring on my shade will not allow me to put tension on it. When I hold the flat part with pliers and try to wind up the spring it just keeps ...
I have a Mersman bed table and I'm not sure if's it's real, it has the word Mersman on the inside of the drawer.
Hi, I'm buying a newly constructed home that was a "inventory" or "spec" home and so was fairly well along in the construction process when I boug...
I'm having a house built in Melbourne Beach Fl. It was determined we needed a stem wall. We paid an additional $12,500 to build the stem wall as pe...
hello im from new orleans if any of you please provide me whid going rate for drywall,for .ganging and finishing per .sq.ft thans you
i am using the mortar poured onto a flat surface to get bear paw prints by my garbage cans at night. when the mortar drys it flakes or cracks. am...
This is cross-posted from the other forum, here... I'm digging a trench for an electrical conduit in my back yard. And by "I", I mean a couple o...
Our kitchen drawer boxes are a single piece of molded plastic with a drawer guide molded into the back and the front screwed onto the drawer face. ...
Hello! I am due to give birth to my first child Dec.1st. I recieved an excellent crib from my brother and his wife that they used with their daught...