What can I use to remove a mark of permanet marker from my leather car seat? With very little damage to the leather.
COMMUNITY FORUM: MISCELLANEOUS
We have a narrow lake front lot and have decided to build. How should we begin to decide modular vs stick built? Any good books you can recommend ...
My garage walls are block. What is the best type of product to put over this block to seal it better or just to spruce it up and make it more mode...
The walls in my home are double insulated and they seem like concrete. I dont know what they are made of. The home is a 1960's split level. I have ...
I'm looking for an armature for a model 315.85710 Craftsman Hedge Trimmer. These are no longer available through ***** parts department. I will c...
Concrete sidwalk and curb have rust stain spots. Concrete is 3 years old. I am looking for a way to remove the rust spots. Thank you
We are looking at a Doublewide mobile home to purchase. We have two to choose from, one has Nova decking and the other has OSB flooring. Which is...
By accident I left a dryer sheet on an end table and a book got sat on top of it. The dryer sheet is now stuck to the finish of my end table - how...
Hi, Does anyone know how to remove the print from the outside of pvc pipe? Thanks Regards, Doug
I have salvaged from a neighbor's apartment a beautiful green marble two-sink counterop 1.5" thick and 72" long. If I can cut it to 36" it will per...
Hello, I need help installing outdoor speakers. My concern is drilling through vinyl siding. Can anybody help me by explaining how to drill vinyl ...
We live near Reno, NV and have and aging 3 rail cedar fence. We can no longer get the 3 hole rails locally. Does any one know if there is a suppl...
I want to pour some concrete next to my house but just above my foundation wall is a wooden header (probably 2 - 2X8s on edge) that is about 8 inch...
The motor on my delta model 22-540 12 1/2" thicknes planer burned out, the rest of planer is OK. Anybody have a used motor from a planer that is ...
dgclover, Thank you for your insightful posts. I spent the last year running around in circles with all the steel home builders. The dance i...
We are trying to restore a house that is over 350 years old. We had a contractor do the addition and now that we have run out of money we are tryi...
I opened some old super glue with some scissers and some glue got on the scissors now the scissors are glued shut what can I use to free the scisso...
We've just completed remodeling several rooms and our contractor over-estimated our tile order. His mistake is your gain. All of these tiles were ...
does anyone have any huntington tile A-106 qurter rounds and some 731 bull nose tile?
I am looking for a motor for a Craftsman 12 inch direct drive saw. The model # is 113.299131 and the part # is 62459 This is an old saw and *****...