The motor on my delta model 22-540 12 1/2" thicknes planer burned out, the rest of planer is OK. Anybody have a used motor from a planer that is ...
COMMUNITY FORUM: MISCELLANEOUS
dgclover, Thank you for your insightful posts. I spent the last year running around in circles with all the steel home builders. The dance i...
We are trying to restore a house that is over 350 years old. We had a contractor do the addition and now that we have run out of money we are tryi...
I opened some old super glue with some scissers and some glue got on the scissors now the scissors are glued shut what can I use to free the scisso...
We've just completed remodeling several rooms and our contractor over-estimated our tile order. His mistake is your gain. All of these tiles were ...
does anyone have any huntington tile A-106 qurter rounds and some 731 bull nose tile?
I am looking for a motor for a Craftsman 12 inch direct drive saw. The model # is 113.299131 and the part # is 62459 This is an old saw and *****...
I'm new to this forum, and hope I'm on the right message board. My 1959 raised-ranch house has pinewood tongue & groove paneling over the fireplace...
Just built a small wheelbarrow planter for back yard. Painted it with opaque redwood stain. (2 coats). Stenciled sides and back using "Dry" Acrylic...
Does anyone know where I can get a folding shower door that was Manufactured by Kinkead Industries?
I am planning to lay brick over a concrete walk. Here's my question: To secure the brick (1/2" pave brick), what is the best method - mortar, q...
I am looking at wood playsets. What type of wood should I use? Here in NC Pressure treated is popular, but I am looking for something that splint...
I have read that pressure treated wood contains cancer causing chemicals. My husband and I are looking at purchasing a children's outdoor playset ...
We have *something* gnawing loudly in our walls at night. The sound drives me nuts. It has only been going on for a few nights now, and seems to mo...
I have a 1974 doublewide moble home I am remodling and need to know if there are support walls in one or if they are self supporting via the exteri...
I am going to be doing work on my old 1 1/2 story farmhouse that was originally clapboard siding but now has asbestos siding. The house is in Conne...
I have just noticed that, once posted, a post cannot be altered or deleted. Sometimes it is wise to shorten, improve or change information. In this...
I AM PUTTING A KITCHEN INTO AN IN-LAW SUITE AND NEED KITCHEN CABINETS AND COUNTERTOPS THAT ARE IN GOOD CONDITION. I MAY ALSO NEED AN ELECTRIC RANG...
My mom lives on the ocean in new jersey and she has a 50 year old cynder block retaining wall that is pulling away on one side and cracked both hor...